Hello all.
I have a number of spring loaded hinges if you can post a picture or two I would love to see how you apply them. Sounds like a pretty smart CONCEPT. Thanks Andy. C.A.G. ----- Original Message ----- From: "Bill Bulkeley " < bulkeley @ mmnet .com. au > To: legacy-ornamental-mills@ googlegroups .com Sent: Tuesday, November 22, 2011 2:56:25 PM Subject: Re: featherboards and supports very interesting could you post a picture of them Bill ----- Original Message ----- From: "Andy" <atmartin23@ gmail .com> To: "Legacy Ornamental Mills" <legacy-ornamental-mills@ googlegroups .com> Sent: Wednesday, November 23, 2011 1:40 AM Subject: Re: featherboards and supports if you're looking for a cheaper option, I've actually made feather boards using spring loaded hinges. You can buy them from any hardware store. I actually prefer them to regular feather boards because they have more variability. for instance, if i'm truing up a rough piece of lumber on the table saw against the fence. The spring loaded hinges will still hold the piece against the fence even with the variability in the board width. A regular featherboard usually is worthless if your piece varies in width by more than 1/4 inch. I've used the system on my table saw, bandsaw , and jointer . The expensive part is the turn-lock magnets i use to hold the system to my work surface, but if you perminently mount them, you would not need the turnlocks . I'm sure you could use the same hinges mounted differently and mount some rollerblade wheels to them and get the same results for much less. Just a suggestion. Andy -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To post to this group, send email to legacy-ornamental-mills@ googlegroups .com. To unsubscribe from this group, send email to legacy-ornamental-mills+ unsubscribe @ googlegroups .com. For more options, visit this group at http ://groups. google .com/group/legacy-ornamental-mills? hl =en. ----- No virus found in this message. Checked by AVG - www.avg.com Version: 2012.0.1873 / Virus Database: 2101/4630 - Release Date: 11/21/11 -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To post to this group, send email to legacy-ornamental-mills@ googlegroups .com. To unsubscribe from this group, send email to legacy-ornamental-mills+ unsubscribe @ googlegroups .com. For more options, visit this group at http ://groups. google .com/group/legacy-ornamental-mills? hl =en. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. To unsubscribe from this group, send email to legacy-ornamental-mills+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en.