Thanks for the help ,sorry I have been slow in responding but I was out of town for a few days. I was thinking a simple cove crown .finally found a sample I liked back in Savannah ,might still make it myself because the wood they used is different species. I just installed a tongue and groove ceiling and sealed it . Trying to decide on paint grade moulding or stain. The whole house has painted where it could be stain .
On Fri, Oct 18, 2013 at 12:36 AM, Okla Mike (Liltwisted) <legacym...@iglide.net> wrote: > For short runs like under 7 feet I will use the Legacy to do a quick match > of historic or repair purposes. For anything longer or a job of 50 Linear > feet or more, I have a blade made for my Williams and Hussy molder. With > that little machine I can do straight mold as well as arch molding. With > the push through method the use of feather boards will help you make short > work of many sticks of molding. Just make the same cut on every stick > before you change settings and blades. I use a 1" wide piece of existing > mold as a blade bump to check the fit before each run. Then if it is a new > pattern, I will bandsaw out a profile and use it as the alignment piece. > Many possibilities, too few hours to play. > > Mike > > > On 10/17/2013 1:08 PM, Cole Andrews wrote: > > Has anyone else tried to use their mill to make moulding. I am > thinking of making my own after not being able to find what I want > local unless I order a bunch of it. > > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > Visit this group at http://groups.google.com/group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/groups/opt_out.
