Thanks Curt. If my memery serves me right, Tim used 4Z128B 1/8 HP. 11:1 Gear-box ratio. 167 RPM Final output speed. 43 Inch-pounds torque on X axis. Tim what can you say about it?
2014/1/13 curt george <curtgeo...@wowway.com> > Wow! that is so weird, > I posted these yesterday. I hope the pictures help.Fast speed on the motor > drive is not what you are looking for. > 'Good luck on your project.Arkady. > C.A.G. > > ----- Original Message ----- > *From:* curt george <curtgeo...@wowway.com> > *To:* Legacy Google group <Legacy-Ornamental-Mills@googlegroups.com> > *Sent:* Sunday, January 12, 2014 5:26 PM > *Subject:* Re: Drive Motor Dayton 4Z128B or 4Z381A > > > > ----- Original Message ----- > *From:* curt george <curtgeo...@wowway.com> > *To:* legacy-ornamental-mills@googlegroups.com > *Sent:* Sunday, January 12, 2014 9:17 AM > *Subject:* Re: Drive Motor Dayton 4Z128B or 4Z381A > > Hello and Good morning Arkady > These are DC motors right? low speed is what you need for the X axis > movement (carriage movement.), If you use that 92 prm motor with a speed > control on it, I would think that your working/cutting speeds should be > something like 0- 40 rpm max.( perhaps a little higher,depending on what > type of cut you are making.) The crank handle or acme screw is 4 turns per > inch, It dose not need to turn fast in order to move, slow and controllable > speed is with you need. > Now if you are looking for the spindle drive motor, (turning the drive > spindle with the motor the higher speed is needed.) higher speeds are what > you want for that. > Here are my two motors,and limmit switch that Ive made. > C.A.G. > > ----- Original Message ----- > *From:* Arkady Paka <arkadyp...@gmail.com> > *To:* legacy-ornamental-mills@googlegroups.com > *Sent:* Sunday, January 12, 2014 7:47 AM > *Subject:* Drive Motor Dayton 4Z128B or 4Z381A > > > Hi all. > Which one do you recomend for Axis X and Axis A Drive Motor Dayton 4Z128B > or 4Z381A? > 4Z128B 1/8 HP. 11:1 Gear-box ratio. 167 RPM Final output speed. 43 > Inch-pounds torque. > 4Z381A 1/8 HP. ? Gear-box ratio. 92RPM Final output speed. 77 Inch-pounds > torque. > What is more impotant for each axis? High speed and low torque or low > speed and high torque? > Thanks. > Arkady. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > Visit this group at http://groups.google.com/group/legacy-ornamental-mills > . > For more options, visit https://groups.google.com/groups/opt_out. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > Visit this group at http://groups.google.com/group/legacy-ornamental-mills > . > For more options, visit https://groups.google.com/groups/opt_out. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > Visit this group at http://groups.google.com/group/legacy-ornamental-mills > . > For more options, visit https://groups.google.com/groups/opt_out. > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/groups/opt_out.
