Very very nice work Bill
From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Dexter Bland Sent: Wednesday, 25 February 2015 1:16 PM To: legacy-ornamental-mills Subject: Completed Project All. Here is a just completed project that the Legacy had played a small but important part in. It is a 11 foot tall by 14 foot long set of bookshelves. It was built in four sections, each being the full height. Wood was Red Oak with Sherman Williams stain color "pecan" with a Minwax matte finsh poly topcoat. One end was covered by adjoining wall and the other was open to be seen. I made a raised panel on that end, but it is obscured by a post that you can see on the opposite end from where the photo is taken. (did not get a photo of this) This thing is so tall and long that it is hard to get a good photo of it (at least with my camera). I made the rosettes that top off the fluted trim and the spindle that is the top rung on the ladder with the Legacy. The spindleI started as a 1.5" dowel, used 3/4" rope moulding cutter, 4 starts with a 6" pitch. I used a left and right hand spiral on either end just to give it more visual interest. The rollling library ladder was interesting to make (my first). The hardware is quite expensive. Just short of 1k for one relatively small box of parts and a PVC tube with the rail. It does roll rather nicely I have to say. Another happy customer with several neighbors ;) -- Dexter Bland "All that is necessary for the triumph of evil is for good men to do nothing." Edmund Burke -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.