Correction Curt 5/8 X 4 tpi leadscrew Bill down under
From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE Sent: Thursday, 12 March 2015 12:10 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Lead Screw Hello Bill That could be something useful to one of our group? although the Legacy acme screw is 5/8"x8 so a new nut and hook up to the carriage, will be needed if ...? But anything is possible. Thanks for the idea. C.A.G. _____ From: "Bill Hallow" <wchal...@verizon.net> To: legacy-ornamental-mills@googlegroups.com Sent: Wednesday, March 11, 2015 8:12:24 PM Subject: Lead Screw Hello All, Some time ago there was a thread looking for a source for lead screws. I didn’t follow it too closely, so I don’t know if a good source was ever found. Well, to the point. Today I purchased a new screw drive garage door opener. It came with, you guessed it, a nine foot lead screw. The lead screw is in three foot sections that interlock to form one screw, and is steel, one half inch diameter, and has eight threads per inch pitch. If this would work for use, I would guess that there are old screw drive garage door openers out there. Bill -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5751 / Virus Database: 4306/9278 - Release Date: 03/11/15 -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
