You are correct that I used the "Crank Handle Indexing" But what math
would you use to create 19 indexes?
I have no idea how heavy they turned out but I did what I could to
lessen the load.
Mike OK
On 1/1/2018 12:50 PM, 'Curt George' via Legacy Ornamental Mills wrote:
Very Nice Mike!
I very much like your gear indexing concept... (Just for those who
have not seen Mike's video...
https://www.youtube.com/watch?v=oHgzEKnON-o&t=7s )
Now one of these days we need to take a better look at the Radio
lathe/ wood chuck modifications (but that's another topic.)
How heavy are those trophy s ? they are huge!
Thanks for sharing with us Mike.
Happy New Year!
C.A.G.
On Monday, January 1, 2018 12:38 PM, Okla Mike (Liltwisted)
<legacym...@iglide.net> wrote:
Well here is the first post of the year with my Wood Chuck. I have
been making many trophy bases over the years that have gone in a lot
of important events. Here are two of them. The Nascar Quicktrip 500
and the Arena Football AFL trophys. We will start with the 500.
The black part that looks like a tire is what I make.
I use a bird mouth to assemble then turn it round. Dyna-glide for scale
You can see all I had to do to increase my Wood Chuck to swing 20"
then true up the ends and glue on the top
then I flush trim, round over the corners and put a 14 inch inset for
the trophy top to set.
Ta Da! Total of about 3 hours work. They seem to like it cause they
have been having me make them for the last 6 years.
Next we have the Arena Football trophy. I don't have as many picture
of it though.
Again it is, as you can see, the part they painted. Then they inlaid
the flutes with polished metal and then assembled.
On this one I just used a 22.5 cut, it's only 7.5" in diameter and was
easy to control. But here is the fun part, the flutes!
They were supposed to be 5/8" flutes with 5/8 space. Do the math,
it's 19 indexes.
How did I do it??????????????
I'll leave you with that. More later
Mike OK
--
You received this message because you are subscribed to the Google
Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to legacy-ornamental-mills+unsubscr...@googlegroups.com
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com>.
To post to this group, send email to
legacy-ornamental-mills@googlegroups.com
<mailto:legacy-ornamental-mills@googlegroups.com>.
Visit this group at
https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google
Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to legacy-ornamental-mills+unsubscr...@googlegroups.com
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com>.
To post to this group, send email to
legacy-ornamental-mills@googlegroups.com
<mailto:legacy-ornamental-mills@googlegroups.com>.
Visit this group at
https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "Legacy
Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.
