To answer C.A.G. I am using the motor to turn the gears. Think I got it 99% fixed.
Took out the router, cleaned up everything, put it back together and made sure everything was level. Next I tightened the tailstock a little. Played around with the Y axis until you can't see the ridges and can feel just the slightest ridge that I should be able to sand out. Yeah! On Sat, Jan 26, 2019, 6:06 PM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com wrote: > Hello Chris. > are you using the gears to drive the carriage/ router? or are you turning > free hand? (hand cranking.) > > C.A.G. > > On Saturday, January 26, 2019, 1:19:56 PM EST, Chris Smith < > smithin...@gmail.com> wrote: > > > I'm a new owner of the Legacy 1000EX and have been practicing on some dry > 2x2 Ash, turning it down for a shovel handle. I can get the blank round > but still have small ridges. I've followed the instructions to adjust the > Y axis forward or back which improves it somewhat, but doesn't eliminate > the ridges. Am I doing something wrong or will I need to sand them out? > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > Visit this group at > https://groups.google.com/group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > Visit this group at > https://groups.google.com/group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
