Re: three legacy's for sale and accessories and parts

[MWF]

That's me - same guy.

---

-----Original Message-----
From: rkcorbettjr
Sent: Aug 13, 2019 1:12 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: three legacy's for sale and accessories and parts

I sent my location and the little I  know to MWF. His response was very similar to yours and much appreciated.

Russ Corbett

Sent from my Verizon, Samsung Galaxy smartphone

-------- Original message --------

From: MWF <mwfos...@earthlink.net>

Date: 8/13/19 1:00 AM (GMT-05:00)

To: legacy-ornamental-mills@googlegroups.com

Subject: Re: three legacy's for sale and accessories and parts

Hello R K Corbett,

Earlier (Monday) I sent you an email thru this Group.  In it I requested you tell us where in Maryland you live - because we have a member or two that live in Maryland (and possibly nearby in PA, WV or VA) that you might want to meet up with for some "Miller Time" (talking about and possibly some hands on time) with your Mill.

I also requested you share with The Group which model of Mill you have.  That proves to be VERY useful when asking a question here or explaining a challenge you may encounter while using your Mill.

Should you still wish to unsubscribe, there is a 4-line block at the bottom of ALL Group emails.  The second line of the four has a hyperlink that takes you to the page that you request "Unsubscribe" on.  It should be a very easy and quick page/form to complete.

We do hope that you will "stick around" for a month or two at least - reading threads that interest you (and disregarding/deleting those that don't).  During that time, Please post some of the "issues that you have encountered when using your Mill.  I am certain that at least on member has "been down that road" before - and will be willing and able to address your concern/question.

Wishing you The Best - no matter which way you decide to go.

Mac

---

---

-----Original Message-----
From: rkcorbettjr
Sent: Aug 11, 2019 8:25 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: three legacy's for sale and accessories and parts

I am a legacy owner and on your email list. Given that my legacy is not used that often, I would like to unsubscribe.  Can someone tell me how to do that?

Sent from my Verizon, Samsung Galaxy smartphone

-------- Original message --------

From: Tim Krause <artmarb...@comcast.net>

Date: 8/8/19 1:33 AM (GMT-05:00)

To: Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com>

Subject: Re: three legacy's for sale and accessories and parts

We are getting off topic here and it's my fault, but there are some pictures in old messages that show what he got.  A small vile with a tiny amount of dust in it is pretty average for him.  He always says he can't quit his day job!

On Aug 7, 2019, at 9:33 PM, MWF <mwfos...@earthlink.net> wrote:

Thanks for the update.

Now, let's see if Curt "practices what he preaches" after the trip.

He is always asking for pictures.  Let's see if he posts pictures for us to see, of all the gold he panned.

For his sake (and Mike's), I hope they find the Mother Lode!

Mac

---

---

-----Original Message-----
From: Tim Krause
Sent: Aug 7, 2019 11:24 PM
To: Legacy Ornamental Mills
Subject: Re: three legacy's for sale and accessories and parts

Well to let out more secrets, Curt and Mike are slaving away looking for gold in the UP.   Can't wait to hear about Mike finding it all again. 😀

On Aug 7, 2019, at 10:32 AM, Tim Ziegler <timjzieg...@gmail.com> wrote:

keep in mind the woodchuck guru is traveling (AKA MIKE PUNG) but is here in Minnesota so we can let him know to respond if that helps?

I also have both the LOM and WC

Kind Regards,

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

320-294-5798 shop

320-630-2243 cell

On Wed, Aug 7, 2019 at 12:09 PM 'joe biunno' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote:

received additional photos from the buyer(now seller) of those three Legacy mills... these photos show the seller organizing and grouping the parts as best he knows(he knows almost nothing about the workings of a legacy mill, generally speaking)… there are 14 additional photos here, and I am going to try posting three photos per post... as I mentioned before, I am not scaling the photos down, so let's see how this might work as far as individual members downloading time... I will also ask members of this group to refer to the photo number when commenting, so we all can reference back to the photo... what is being asked here is an identification of what is there, for the purpose of what goes with the three legacy's that he is selling and what will then be sold separately as parts... there seems to be a decent amount of woodchuck parts, but ii would wait to hear from the woodchuck guys as to what they can identify.

--
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/2107227895.18553.1565673644721%40wamui-berry.atl.sa.earthlink.net.