Richard.take some pictures of this machine. When there is a will, There is always a way...There may be a way to restore this machine? or to use it for the base of a New idea. ;-) I've been playing around with the idea of adding linear rails onto a REVO, If you use this idea, most of the bad parts could be bypassed. What I'm saying is, Don't ever give up! Any Machine can ALWAYS be re-worked.And a machine in bad shape is worth nothing to most people. C.A.G. On Sunday, December 20, 2020, 10:05:26 AM EST, Curt George <curt.geo...@yahoo.com> wrote: Are you sure that lead screw is ruined? If its in as bad shape as you state. offer a few bucks for it. Out side the leadscrew and gears the hole machine only has $30.00 worth of scrap metal in it. If you can get it, a little TLC (Tender Loving Care.) I know you can get it working again.I wish you luck on this one. In the worst case... if you pick it up. there are some parts in the machine that others (or your self) who could use with your Legacy. Good luck.C.A.G. On Sunday, December 20, 2020, 05:47:50 AM EST, Richard Ellis <rchrd.ell...@gmail.com> wrote: I have a good friend who wants a REVO I know where there is one, in an old barn, but in a very sad state. It is very rusty and has been for a long while. It has a rotary table laying on the floor along with other Revo stuff. It also has a plate holder on the front with a few cutters in it They are also very very rusty. I don't think This sad Revo has been used for about six or more years.Now my question !!! What is a sensible offer ,bearing in mind the leadscrew is ruined. And spares are not available here in the U,K, It will need a lot of work to restore it to a good condition.Richard U.K.
-- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/887f739c-cb48-4ff8-9e55-67f81470f77an%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/945148535.1769261.1608477288547%40mail.yahoo.com.