Re: Thread cutting router bit

Mon, 28 Dec 2020 10:38:07 -0800

Mike,
Tim (I think) & I are referring to if you use the "Thread-cutting" Magnate bit that's on eBay.  Not the bit Bill used in his video on the screw shank.  That bit was essentially a V-bit.  The eBay bit is side-cutting.
Mac
-----Original Message-----
From: "Okla Mike (Liltwisted)"
Sent: Dec 28, 2020 1:06 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Thread cutting router bit

Attach the router to the carriage and it will be set on the gear pitch of your choice.

On 12/28/2020 11:37 AM, Tim Ziegler wrote:
thanks Mike

How is it fed then? to keep the bit on track? 

Kind Regards,

Timothy J. Ziegler
On Mon, Dec 28, 2020 at 11:07 AM Okla Mike (Liltwisted) <legacym...@iglide.net> wrote:

Here is a video from Bill https://www.youtube.com/watch?v=J1RPgkrqiBk

On 12/28/2020 10:35 AM, Tim Ziegler wrote:
Good to know. Now how do you cut inside Threads Mike or Mac?

Kind Regards,

Timothy J. Ziegler
On Mon, Dec 28, 2020 at 10:29 AM Okla Mike (Liltwisted) <legacym...@iglide.net> wrote:

This bit is made to be used horizontally.  it can be used on the nut as well as the outer thread.  If you have a long bolt, you will need to cut it from the top using a regular V bit of the same pitch.

On 12/28/2020 10:23 AM, Tim Ziegler wrote:
Hey Mac,

Would it be for the nut on the inside thread?
Kind Regards,

Timothy J. Ziegler
On Mon, Dec 28, 2020 at 10:12 AM M.W.Foscue <mwfos...@earthlink.net> wrote:
Saw this router bit on eBay - and can't wrap my mind around how you would use it to make threaded wood pieces - using the manual LOM like most of us have.  Seems like it's made to only use on a CNC Legacy. 
So, in case some of you have the CNC Legacy and are thinking of making threaded dowels/screws  - this might be what you are looking for.


Mac

--
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/634112501.3006.1609180682588%40wamui-gaston.atl.sa.earthlink.net.

Reply via email to