Ok Bill, I'm heading out to the shop but if you see a link today maybe send it again and I'll look. Kind Regards,
Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sat, Aug 7, 2021 at 8:32 AM <bulke...@mmnet.com.au> wrote: > Well Tim don’t let the grass grow under your feet, before these taps it > was 10 years ago that I found 2 only 2 me and Tim K bought them they were > in the uk and mine burnt in the fire so Tim K has the only original one in > existence. If the ones on ebay go you will never see another for years if > ever. > > > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler > *Sent:* Saturday, 7 August 2021 11:00 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: Dadoing drawer sides on the LOM1200 > > > > Hey Bill, > > > > No I have not bought that but I would also want the metal plate etc... > that is used to complete the system. > > So I am looking for the complete unit that bolts right on. > > I will look into getting one of those soon I think though. I could > make most everything if I really wanted but > > I'm one of those that if it's made buy it. lol > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > > > > On Sat, Aug 7, 2021 at 7:53 AM <bulke...@mmnet.com.au> wrote: > > Yes that’s why I run 2 saddles, 2 headstocks, 2 tailstocks and 2 > leadscrews it gives me the option to have 2 separate jobs set up at the > same time. Im just missing the z axis I really must make another. > > As for another split nut didn’t you buy the 5/8X4 acme tap on ebay like me > and curt did? > > That way you can make your own. > > > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler > *Sent:* Saturday, 7 August 2021 8:51 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: Dadoing drawer sides on the LOM1200 > > > > Hey Bill, > > > > Yeah I put my Z axis system back on to run more of the dado's and grooves > that i do. > > and put it on the left that way I can still leave my plunge router over on > the end where I > > tend to play at the moment. I like the plunge action much better for > getting down into > > cut and back out. So much quicker. but the Z axis saddle has a > prominent place in what > > I am doing when horizontal and vertical milling. Grooves and Dados etc... > > I do need to get another complete split nut system for the acme thread > though. Currently > > I manually slide the Z axis Carriage/saddle. > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > > > > On Sat, Aug 7, 2021 at 1:37 AM <bulke...@mmnet.com.au> wrote: > > Not at all Tim all work on the mill is a big deal ,looks like your running > 2 saddles on your mill what a good idea I wonder where you got that idea > from? > > To a beginner this would be very interesting. > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of * > timjz...@gmail.com > *Sent:* Saturday, 7 August 2021 12:41 PM > *To:* Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com> > *Subject:* Dadoing drawer sides on the LOM1200 > > > > I have been doing a lot of dado's on my LOM 1200 > > This has been working extremely well as you can see what your doing. > > Set up is as quick as the router table or faster and far easier to see. > > I'd assume no big deal to most but this machine has to own up to the > > space it uses in my shop. > > I have done many 1/4 dados and several 3/4 X 1/4 deep for cabinet work. > > Here I used the Horizontal vise other times I have a piece of MDF that I > mount > > on the rails just for dado's > > > > > > Kind regards, > > > > Tim J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/efebc5d7-386e-4bf5-a65f-cdce627cba78n%40googlegroups.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/efebc5d7-386e-4bf5-a65f-cdce627cba78n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/000001d78b56%24b6f50c00%2424df2400%24%40mmnet.com.au > <https://groups.google.com/d/msgid/legacy-ornamental-mills/000001d78b56%24b6f50c00%2424df2400%24%40mmnet.com.au?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLE4N1bqmfyUJAV-EtRQm_A1f9R7fOU70g-WWNdvD7DQLg%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLE4N1bqmfyUJAV-EtRQm_A1f9R7fOU70g-WWNdvD7DQLg%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/000d01d78b8b%243535eb00%249fa1c100%24%40mmnet.com.au > <https://groups.google.com/d/msgid/legacy-ornamental-mills/000d01d78b8b%243535eb00%249fa1c100%24%40mmnet.com.au?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHhwJecPtFSbzFqmJRtNuYYmG_7HMBvcEEUaP3j0h2nWw%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHhwJecPtFSbzFqmJRtNuYYmG_7HMBvcEEUaP3j0h2nWw%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/000a01d78b90%2499b29c90%24cd17d5b0%24%40mmnet.com.au > <https://groups.google.com/d/msgid/legacy-ornamental-mills/000a01d78b90%2499b29c90%24cd17d5b0%24%40mmnet.com.au?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGR5fTrQsanoQXKWiM96S6nHZwr_9iA%2BH50zzHJgtS_gw%40mail.gmail.com.
