This stuff sounds ok I am a little concerned because it doesn’t dry that sawdust might mix with it and gum up the top hats
Bill From: 'Curt George' via Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com> Sent: Wednesday, 26 January 2022 4:19 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: DynaGlide suppliers Hey everyone. Here is an incert form there web site. https://www.slipit.com/all-products/index.html C.A.G. The Full Line of SLIPIT Lubricants SLIPIT offers two basic varieties of lubricants. Our original formulation, which uses silicone, as well as a non-silicone formulations. Each is available in three forms to suit specific applications: liquid, gel and aerosol spray. SLIPIT liquids are the “workhorse” of the product line offering convenience without the need of an aerosol. The gel is applied with a brush or a cloth. It may also be applied by hand and is thixotropic: it liquefies when stirred for ease of use. The principal characteristic of a gel is that it stays precisely where it is applied so it is less messy. An aerosol is convenient to use and can be applied in precise locations with the use of the directional tube. Click on any product below to purchase on our parent site: fehr.com. <https://www.fehr.com/slipit-lubricants-1/slip-it-spray-lubricant-11237-slipit-sprayx1> Silicone Free Slip-it Spray Lubricant 11237 Product Code:SLIPIT-SPRAYX1 <https://www.fehr.com/slipit-lubricants-1/slip-it-spray-lubricant-11237-slipit-sprayx1> Order now on our parent site: fehr.com <https://www.fehr.com/slipit-lubricants-1/slip-it-spray-lubricant-x-12-can-case-11237-slipit-spray> Slip-it Spray Lubricant X 12 Can Case 11237 Product Code:SLIPIT-SPRAY <https://www.fehr.com/slipit-lubricants-1/slip-it-spray-lubricant-x-12-can-case-11237-slipit-spray> Order now on our parent site: fehr.com <https://www.fehr.com/slipit-lubricants-1/slip-it-silicone-free-tool-lubricant-11-oz-x-12-cans-slipit-tool11236x12> Slip-it Silicone Free Tool Lubricant 11 Oz X 12 Cans Product Code:SLIPIT-TOOL11236X12 <https://www.fehr.com/slipit-lubricants-1/slip-it-silicone-free-tool-lubricant-11-oz-x-12-cans-slipit-tool11236x12> Order now on our parent site: fehr.com <https://www.fehr.com/slipit-lubricants-1/slip-it-silicone-free-sliding-compound-quart-slipit-sf-quart32447> Slip-it Silicone Free Sliding Compound Quart Product Code:SLIPIT-SF-QUART32447 <https://www.fehr.com/slipit-lubricants-1/slip-it-silicone-free-sliding-compound-quart-slipit-sf-quart32447> Order now on our parent site: fehr.com <https://www.fehr.com/slipit-lubricants-1/slip-it-silicone-free-sliding-compound-pint-slipit-sf16447> Slip-it Silicone Free Sliding Compound Pint Product Code:SLIPIT-SF16447 <https://www.fehr.com/slipit-lubricants-1/slip-it-silicone-free-sliding-compound-pint-slipit-sf16447> Order now on our parent site: fehr.com <https://www.fehr.com/slipit-lubricants-1/slip-it-silicone-free-sliding-compound-4-oz-slipit-sf40447> Slip-it Silicone Free Sliding Compound 4 Oz Product Code:SLIPIT-SF40447 <https://www.fehr.com/slipit-lubricants-1/slip-it-silicone-free-sliding-compound-4-oz-slipit-sf40447> Order now on our parent site: fehr.com <https://www.fehr.com/slipit-lubricants-1/slip-it-lubricant-quarts-32435-slipit-q> Slip-it Lubricant Quarts 32435 Product Code:SLIPIT-Q <https://www.fehr.com/slipit-lubricants-1/slip-it-lubricant-quarts-32435-slipit-q> Order now on our parent site: fehr.com <https://www.fehr.com/slipit-lubricants-1/slip-it-lubricant-pints-16435-slipit-p> Slip-it Lubricant Pints 16435 Product Code:SLIPIT-P <https://www.fehr.com/slipit-lubricants-1/slip-it-lubricant-pints-16435-slipit-p> Order now on our parent site: fehr.com <https://www.fehr.com/slipit-lubricants-1/slip-it-lw-liquid-quart-slipit-pump32710> Slip-it LW Liquid Quart Product Code:SLIPIT-PUMP32710 <https://www.fehr.com/slipit-lubricants-1/slip-it-lw-liquid-quart-slipit-pump32710> Order now on our parent site: fehr.com <https://www.fehr.com/slipit-lubricants-1/slip-it-silicone-free-liqui-form-quart-slipit-sf-pump32595> Slip-it Silicone Free Liqui-Form Quart Product Code:SLIPIT-SF-PUMP32595 <https://www.fehr.com/slipit-lubricants-1/slip-it-silicone-free-liqui-form-quart-slipit-sf-pump32595> Order now on our parent site: fehr.com <https://www.fehr.com/slipit-lubricants-1/slip-it-silicone-free-liqui-form-pint-slipit-sf-pump16595> Slip-it Silicone Free Liqui-Form Pint Product Code:SLIPIT-SF-PUMP16595 <https://www.fehr.com/slipit-lubricants-1/slip-it-silicone-free-liqui-form-pint-slipit-sf-pump16595> Order now on our parent site: fehr.com <https://www.fehr.com/slipit-lubricants-1/slip-it-lubricant-5-gallon-50435-slipit-5g> Slip-it Lubricant 5 Gallon 50435 Product Code:SLIPIT-5G <https://www.fehr.com/slipit-lubricants-1/slip-it-lubricant-5-gallon-50435-slipit-5g> Order now on our parent site: fehr.com <https://www.fehr.com/slipit-lubricants-1/slip-it-lubricant-gallon-10435-slipit-g> Slip-it Lubricant Gallon 10435 Product Code:SLIPIT-G <https://www.fehr.com/slipit-lubricants-1/slip-it-lubricant-gallon-10435-slipit-g> Order now on our parent site: fehr.com <https://www.fehr.com/slipit-lubricants-1/silicone-free-sliding-compound-5-gallon-slipit-sf-5gallon50447> Silicone Free Sliding Compound 5 Gallon Product Code:SLIPIT-SF-5GALLON50447 <https://www.fehr.com/slipit-lubricants-1/silicone-free-sliding-compound-5-gallon-slipit-sf-5gallon50447> Order now on our parent site: fehr.com <https://www.fehr.com/slipit-lubricants-1/slip-it-silicone-free-sliding-compound-gallon-slipit-sf-gallon10447> Slip-it Silicone Free Sliding Compound Gallon Product Code:SLIPIT-SF-GALLON10447 <https://www.fehr.com/slipit-lubricants-1/slip-it-silicone-free-sliding-compound-gallon-slipit-sf-gallon10447> Order now on our parent site: fehr.com <https://www.fehr.com/slipit-lubricants-1/slipit-silicone-free-liqui-form-5-gallon-slipit-sf-5gallon50595> Slipit Silicone Free Liqui-form 5 Gallon Product Code:SLIPIT-SF-5GALLON50595 <https://www.fehr.com/slipit-lubricants-1/slipit-silicone-free-liqui-form-5-gallon-slipit-sf-5gallon50595> Order now on our parent site: fehr.com On Wednesday, January 26, 2022, 12:14:44 AM EST, Curt George <curt.geo...@yahoo.com <mailto:curt.geo...@yahoo.com> > wrote: Hello Shuai Robert Thank you. this is a product that I've not seen before. (here is the link) https://www.slipit.com/all-products/sf-sliding-compound/index.html I will look into this, If you say it works well, then this just might be a good source for Legacy users out side the US. If its not an aerosol it can be shipped to Aus. and else ware around the world. I would like to welcome you to the group. Ive given you full access to the group, just a few min. ago. If you done mind. Please make another post under your name. Im sure lots of others will have some questions for you, as a new member. And I dont want to loose focus on this topic. Again Welcome, and Thank you for the INFO. on Slipit. C.A.G. On Wednesday, January 26, 2022, 12:01:24 AM EST, Shuai Robert <robertsh...@gmail.com <mailto:robertsh...@gmail.com> > wrote: Hello guys, I have used the Slip-it https://www.slipit.com/all-products/sf-sliding-compound/index.html for hand-planes on wood, also on hand saw and jig saw blades to reduce friction. It is non toxic paste with a little bit of liquid oil and becomes softer with temperature (soft year-round for So Cal weather). I can apply it with cheap brushes and due to being silicone free it doesn't cause fish eye on finishing Regardless don't put it on the piece you're cutting, just on metal tools or wood on wood jigs. It does not dry or film, (note manufacture claims it attracts less dust - due to paste wax sitting on top of oil), but as long as the gunk has a place to go it wouldn't affect operation. one quart lasts forever. you just dip a brush lightly on top of the soft oily paste and apply liberally over surface of intended travel of your tool. If it's possible to coat the rails with epoxy precisely that will be most slide-y surface. I have a legacy in the garage for few years now, bought for $300 cash including the Porter Cable Router.. haven't got to using it yet. Slip-it is what I would use on the metal contact points. On Friday, January 21, 2022 at 5:49:37 AM UTC-8 timjz...@gmail.com <mailto:timjz...@gmail.com> wrote: Good morning all, Checking to see where others are getting "Dynaglide". I have tried some different substitutes for this but have never really found one that works quite as well. Bostik Glidecoat being one I currently use as well as Dynaglide. I have used a couple other's from misc. suppliers but to no avail. So besides through Legacy I have found 2 other suppliers that carry it. One is out of stock with the promise is "more on it's way" Promised for at least 2 months now. The other store actually has it on hand. StewMac So Stores: LOM--- Price??? last I got was like $18.00 StewMac------ instock for $20.99 WoodWorker's Supply---- out of stock $23.59 https://www.stewmac.com/luthier-tools-and-supplies/supplies/cleaners-and-lubricants/sound-synergies-dynaglide-tool-conditioner https://woodworker.com/dynaglide-plus-lube-spray-cleaner-14-oz-mssu-171-203.asp I ordered 2 cans last night through StewMac. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/cc4fe01a-72b3-4c6d-bf3f-6b2a1485960dn%40googlegroups.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/cc4fe01a-72b3-4c6d-bf3f-6b2a1485960dn%40googlegroups.com?utm_medium=email&utm_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/2078462260.1282659.1643174320368%40mail.yahoo.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/2078462260.1282659.1643174320368%40mail.yahoo.com?utm_medium=email&utm_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/000001d8128a%24e2bb6b70%24a8324250%24%40mmnet.com.au.
