Opps sorry Tim I screwed up thought it was curts posting guess I’m getting senile lol
So nice job Tim Bill From: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of bulke...@mmnet.com.au Sent: Tuesday, 12 April 2022 2:50 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Walking Stick Turned on my 1200 LOM Came up real nice curt very nice work, that Tiger Strip Maple really has stripes through it I can see them lovely Bill From: legacy-ornamental-mills@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> <legacy-ornamental-mills@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of timjz...@gmail.com <mailto:timjz...@gmail.com> Sent: Tuesday, 12 April 2022 12:23 PM To: Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> > Subject: Walking Stick Turned on my 1200 LOM Good evening all LOM enthusiast's: Hope all is well with all. I just finished a Walking Stick for my sister in-law. The species of wood is Tiger Strip Maple and I must say it really pops. l stained it with a Sherwin Williams "Bronze Walnut" and top coated with vinyl sealer and 2 additional coats of Sherwin Williams lacquer. I used a 1 1/2 roping bit and have 4 starts using the standard gear set, giving me a 6 inch pitch. I also used a 1/4 core box style bit to do the fluting which I incorporated The "Curtis George Indexing System" which worked absolutely perfectly. I cut the indexing plate for in on my Laser Engraver. I also used a 1/2 round over bit for the top end and a 1/4 round over bit on the bottom. The center is using a 45 degree V grooving bit. I believe the last 2 decorative rings at the base I used a 1/8 carbide spiral Bit. One last thing I used a 1/4 taper from end to end to turn the part which the stick is approx. 5 ft long. Overall I am very satisfied with the Stick and finish. Kind regards, Tim J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/c3ef1a20-ad22-49ad-8cac-e7dead9b4ac2n%40googlegroups.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/c3ef1a20-ad22-49ad-8cac-e7dead9b4ac2n%40googlegroups.com?utm_medium=email&utm_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/000001d84e28%24c01416b0%24403c4410%24%40mmnet.com.au <https://groups.google.com/d/msgid/legacy-ornamental-mills/000001d84e28%24c01416b0%24403c4410%24%40mmnet.com.au?utm_medium=email&utm_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/001201d84e2a%24b47db5c0%241d792140%24%40mmnet.com.au.