Yeah I see the drive gears, just not any of the Standard gear set, or
optional ones. X 2 or .25 sets.
I have another guy that could use the drive gears too.
thanks Mike
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Sun, Jan 8, 2023 at 8:55 AM Mike Newman <mrnewma...@outlook.com> wrote:
> Hey Tim on the unit you are looking at within 1.5 hrs of you. If it is
> the same one that I recently saw up in your area go back and take a look at
> the photo showing the whole length of the machine. I think the drive gears
> are hanging on a nail on the lower left front part of the stand. There
> was no single photo of them but the front photo may show them. Im still
> new enough to not know what I am seeing but my guess is those are the drive
> gears.
>
> On Sunday, January 8, 2023 at 1:33:36 AM UTC-6 aussiman wrote:
>
>> Considering the morse taper is primarily used for the drive hub I’m
>> thinking your idea would work well curt , the only other thing
>>
>> the morse taper I can think of is fine adjustments of the drive hub to
>> line it up flat if you put the index hub on not quite strait
>>
>>
>>
>> I got around that problem on the revo by welding a locking collar on the
>> back of the revo drive hub but a slip on sleeve will have a screw
>>
>> You can loosen to rotate the work if needed so I see no reason why Curts
>> idea won’t work
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* 'Curt George' via Legacy Ornamental Mills <
>> legacy-orna...@googlegroups.com>
>> *Sent:* Sunday, 8 January 2023 4:25 PM
>> *To:* legacy-orna...@googlegroups.com
>> *Subject:* Re: old 900
>>
>>
>>
>> Hello Everyone.
>>
>>
>>
>> Tom. what size or dia. is your Legacy headstock shaft (the part your
>> drive hub is connected to?)
>>
>>
>>
>> The easiest way to modify your headstock would be to turn the front part
>> of your shaft to 5/8" dia.
>>
>> This would let you use all of the Shop Smith lathe parts. from a 1x8 TPI,
>> lathe chucks and faceplates.
>>
>> modifying your drive hub is a very easy process too. (that is to make
>> your drive hub into a SS adapter, as well.)
>>
>> Then you would have it all. (except the MT2 part.)
>>
>> If you cant live without a MT2, then you will have to either make one
>> (like I did.) or modify another Legacy's headstock to fit your machine.
>>
>>
>>
>> *{NOTE:* as a side note, I found that the MT2 parts are almost to big to
>> fit the Legacy's headstock for adding ball bearings, But a MT1 taper is
>> small enough to keep the Legacy housing of the headstock, while leaving
>> room for ball bearings or bushings.}
>>
>>
>>
>> *I think for the bang for the buck would be to go with the first idea.*
>> Any machinist could easily re-work the spindle/drive shaft on your legacy,
>> plus Modify the drive hub adaptor for little money. (Its an easy job for a
>> steel lathe.)
>>
>> As for myself. I almost never use the MT2 part of the headstock on my
>> Legacy, the 1x8 thread and the drive hub are normally what I use.
>>
>> Legacy even made the REVO with a 5/8" shaft. So why not your Legacy too?
>>
>>
>>
>> Have a good night.
>>
>>
>>
>> C.A.G.
>>
>>
>>
>>
>>
>>
>>
>> On Saturday, January 7, 2023 at 08:09:54 PM EST, Tom B.C. Canada <
>> gol...@hotmail.com> wrote:
>>
>>
>>
>>
>>
>> Curt, I have that vid about the grape arbour so I know what you mean.
>>
>> I'm not sure just what I'd make with the table but I think the more
>> options the better.
>>
>>
>>
>> You made some great points about the drive hub and prong pieces being
>> very useful.
>>
>> If I can get a 1x8 with morse2 spindle then I could modify my hub into a
>> morse 2 so it could
>>
>> slide into the spindle. I'd like to have the chuck option as well.
>>
>>
>>
>> Very kind of you to let me know about the possible table Tim-thank you.
>>
>> If I could get one then there'd be no need to build one I suppose.
>>
>> I've never seen the underside of the legacy rotary table.
>>
>> Is there a big bearing under there between the mounting plate and the
>> gear- like a lazy susan bearing ?
>>
>> On Saturday, January 7, 2023 at 4:30:34 PM UTC-8 timjz...@gmail.com
>> wrote:
>>
>> 😉
>>
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>>
>> Foreston MN 56330
>>
>>
>>
>> 320-294-5798 <(320)%20294-5798> shop
>>
>> 320-630-2243 <(320)%20630-2243> cell
>>
>>
>>
>> On Sat, Jan 7, 2023 at 5:46 PM <bulk...@mmnet.com.au> wrote:
>>
>> Tom if you think shipping to Canada is difficult try to Australia but if
>> you have good friends on this group all things are possible
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-orna...@googlegroups.com <legacy-orna...@googlegroups.com>
>> *On Behalf Of *Tom B.C. Canada
>> *Sent:* Sunday, 8 January 2023 6:24 AM
>> *To:* Legacy Ornamental Mills <legacy-orna...@googlegroups.com>
>> *Subject:* Re: old 900
>>
>>
>>
>> from my experience shipping things from the USA to here is a real pain.
>>
>> lots of ebay sellers won't even ship to Canada.
>>
>> many costs are involved and the seller's "shipping" cost is only to the
>> broker it seems
>>
>> because the UPS person always has their hand out for more money when they
>>
>> arrive at the door. There's extra hidden charges for customs brokerage
>> fees and taxes etc.
>>
>> It's a gong show.
>>
>>
>>
>> I'm coming up with ideas on redoing the whole machine.
>>
>>
>>
>> Curt, thanks for the tail pic. That looks like what I want to do.
>>
>> might buy a cheap old wood lathe and steal the tail and head spindle from
>> it.
>>
>>
>>
>> Thanks to everyone for their contributions.
>>
>>
>>
>>
>>
>> On Saturday, January 7, 2023 at 9:11:23 AM UTC-8 timjz...@gmail.com
>> wrote:
>>
>> Yeah but the rotary table is great to have. I have 2 of them and would
>> never trade them for anything.
>>
>> You can make some really nice items on them. Rosettes are one of the
>> things I did a lot on. So if you have an opportunity
>>
>> to get one or build one I strongly suggest you go for it. If you need
>> measurements or pix let me know I will get them for you.
>>
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>>
>> Foreston MN 56330
>>
>>
>>
>> 320-294-5798 <(320)%20294-5798> shop
>>
>> 320-630-2243 <(320)%20630-2243> cell
>>
>>
>>
>> On Sat, Jan 7, 2023 at 9:17 AM 'Curt George' via Legacy Ornamental Mills <
>> legacy-orna...@googlegroups.com> wrote:
>>
>> Good morning everyone.
>>
>>
>>
>> Tom, I like that turn table/disk. But I find the table is the lest used
>> Legacy tool that I own. Not to say anything bad about it, I just do not
>> need to use it a lot.
>>
>> In the early days of Legacy, they just used a 2x4 or a piece of plywood,
>> and mounted it between the rails of the Legacy, Then they used the stylist
>> form the templet follower as the center point, There table was just simple
>> a router circle jig type of table.
>>
>> That's How Dane made his Grape arbor in one of his video/ Garden arbor,(
>> Legacy project 2 video.)
>>
>>
>>
>> I have to go,
>>
>> talk to you all more latter.
>>
>> Have a great day.
>>
>>
>>
>> C.A.G.
>>
>>
>>
>> On Saturday, January 7, 2023 at 07:31:06 AM EST, <bulk...@mmnet.com.au>
>> wrote:
>>
>>
>>
>>
>>
>> Well I’m in if it has a controller lol
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-orna...@googlegroups.com <legacy-orna...@googlegroups.com>
>> *On Behalf Of *Tim Ziegler
>> *Sent:* Saturday, 7 January 2023 10:47 PM
>> *To:* legacy-orna...@googlegroups.com
>> *Subject:* Re: old 900
>>
>>
>>
>> For sure. We have one out here about a 1 1/2 away that I have thought
>> about doing that with. I already know someone that could use the rails.
>>
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>>
>> Foreston MN 56330
>>
>>
>>
>> 320-294-5798 <(320)%20294-5798> shop
>>
>> 320-630-2243 <(320)%20630-2243> cell
>>
>>
>>
>>
>>
>> On Sat, Jan 7, 2023 at 1:34 AM <bulk...@mmnet.com.au> wrote:
>>
>> Another option you may not have conceded is buy one with a partner it
>> would be cheaper and he could send you
>>
>> What parts you need and keep what parts he needs
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-orna...@googlegroups.com <legacy-orna...@googlegroups.com>
>> *On Behalf Of *Tom B.C. Canada
>> *Sent:* Saturday, 7 January 2023 2:45 PM
>> *To:* Legacy Ornamental Mills <legacy-orna...@googlegroups.com>
>> *Subject:* Re: old 900
>>
>>
>>
>> Jeff, I wish there were lots of legacy's up here so I could do that.
>> watching a video I learned legacy made 12000 manual machines
>>
>> but is seems very few of them made it up here.
>>
>> On Friday, January 6, 2023 at 8:41:11 AM UTC-8 jtric...@gmail.com wrote:
>>
>> Looks like an 800 model to me, I have one I picked up cheap for parts, it
>> is similar to my model 900 but a bit narrower and lighter duty on bushings
>> and headstock/tailstock. (earlier generation).
>>
>> Jeff from Connecticut
>>
>> Sent from my iPhone
>>
>>
>>
>> On Jan 6, 2023, at 1:25 AM, bulk...@mmnet.com.au wrote:
>>
>>
>>
>> I’m sticking with my last guess as a model 800EXL I really think that’s
>> the one you have
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-orna...@googlegroups.com <legacy-orna...@googlegroups.com>
>> *On Behalf Of *Tom B.C. Canada
>> *Sent:* Friday, 6 January 2023 5:10 PM
>> *To:* Legacy Ornamental Mills <legacy-orna...@googlegroups.com>
>> *Subject:* Re: old 900
>>
>>
>>
>> On Thursday, January 5, 2023 at 10:09:32 PM UTC-8 Tom B.C. Canada wrote:
>>
>> On Thursday, January 5, 2023 at 10:09:06 PM UTC-8 Tom B.C. Canada wrote:
>>
>> On Thursday, January 5, 2023 at 10:08:37 PM UTC-8 Tom B.C. Canada wrote:
>>
>> On Thursday, January 5, 2023 at 10:07:56 PM UTC-8 Tom B.C. Canada wrote:
>>
>> On Thursday, January 5, 2023 at 10:07:01 PM UTC-8 Tom B.C. Canada wrote:
>>
>> I don't think it's a 400 or 500. the frame rails are 5 feet long.
>>
>> more pics
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/f59b8484-4078-4628-b72f-59cf10a8fdb4n%40googlegroups.com
>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/f59b8484-4078-4628-b72f-59cf10a8fdb4n%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental...@googlegroups.com.
>>
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/006301d92197%24a5282470%24ef786d50%24%40mmnet.com.au
>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/006301d92197%24a5282470%24ef786d50%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
>> .
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/1391a03c-91d0-4f9f-96e4-b7841f19115dn%40googlegroups.com
>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/1391a03c-91d0-4f9f-96e4-b7841f19115dn%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/002a01d9226a%247c2c3510%2474849f30%24%40mmnet.com.au
>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/002a01d9226a%247c2c3510%2474849f30%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
>> .
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEC%3Dh-6%2BKNR%3DkidmSwtaix%3DRk5QCMSeVLCoPc2MGbvjHw%40mail.gmail.com
>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEC%3Dh-6%2BKNR%3DkidmSwtaix%3DRk5QCMSeVLCoPc2MGbvjHw%40mail.gmail.com?utm_medium=email&utm_source=footer>
>> .
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/000001d92293%24e52a45b0%24af7ed110%24%40mmnet.com.au
>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/000001d92293%24e52a45b0%24af7ed110%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
>> .
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental...@googlegroups.com.
>>
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/465120419.4326649.1673104669596%40mail.yahoo.com
>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/465120419.4326649.1673104669596%40mail.yahoo.com?utm_medium=email&utm_source=footer>
>> .
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/b1017241-8df2-426a-a02c-6c74f5584705n%40googlegroups.com
>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/b1017241-8df2-426a-a02c-6c74f5584705n%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental...@googlegroups.com.
>>
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/000701d922f2%2446377590%24d2a660b0%24%40mmnet.com.au
>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/000701d922f2%2446377590%24d2a660b0%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
>> .
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental...@googlegroups.com.
>> To view this discussion on the web visit
>>
>>
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/54e9fe95-6944-47f8-95f2-4a579a939867n%40googlegroups.com
>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/54e9fe95-6944-47f8-95f2-4a579a939867n%40googlegroups.com?utm_medium=email&utm_source=footer>
>>
>> .
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental...@googlegroups.com.
>>
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/724642289.4993975.1673155497692%40mail.yahoo.com
>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/724642289.4993975.1673155497692%40mail.yahoo.com?utm_medium=email&utm_source=footer>
>> .
>>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/52b10793-8054-492a-8963-7481398cd281n%40googlegroups.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/52b10793-8054-492a-8963-7481398cd281n%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGzKqP2fZ1AJXusaa0VMx4dkf1c8mZ57GrTSE_CDvrnAA%40mail.gmail.com.
