Curt once again very innovative work well done On Sunday, June 11, 2023, 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote:
> Thank you. > > Here are some more photo's (the parts that you can not see while on the > machine, and a little bit more on how it works. > > The 5/16" ball bearing set make this setup work nicely, The gear/indexing > plate, turns easily with the screw holding it onto the headstock due to > this bearing. > The gear/ plastic gear (or gears,)( I've made three different sized gears > that will fit onto this set.) are held onto the indexing gear/plate. > The ratchet controls the movement of the gears. > The stops/bolts are set to limit the ratchets movement. > The ratcheting index can be removed by removing the bolt holding onto the > cross arm (the bar with all the holes) can be seen in photo #2. > This set-up can be used on either my Legacy 1000 or the 200. > > According to the books that I've read (Holzapfel Practical turning book/ > Geometric Slide Rest. ) The best shape to use are. circle, Oval, triangle, > and Hart shaped rosettes . > > Now things that I've learned by trial and error. the Legacy cuts form the > top, most OT equipment cuts form the side. The big difference is the under > cutting of the wood between the cutting processes. > A 3" rosette only makes appx. 1/4" off-set so 4,5&6" rosettes are what Im > looking at for possible designs. The more complex rosettes do not offer > much contrast. > Here is a video https://www.youtube.com/watch?v=OCO3aJ4gM6w&t=303s this > process is being used in fames. 3;00-4;16 > > There will be more info. latter. > > Have a Great day everyone. > > C.A.G. > > > > On Sunday, June 11, 2023 at 04:45:54 PM EDT, Rick Hutley < > rghut...@gmail.com> wrote: > > > That’s very impressive Curt. I’ll have to think on this one! > > > > Rick > > > > *From: *'Curt George' via Legacy Ornamental Mills < > legacy-ornamental-mills@googlegroups.com> > *Date: *Sunday, June 11, 2023 at 12:21 PM > *To: *Legacy ornamental mills <legacy-ornamental-mills@googlegroups.com> > *Subject: *Ratcheting index system > > Hello Everyone. > > > > I Know most of you will not think much of this ,Since it is not a Legacy > made tool. > > But I for one am Extinctic about this new Toy that I've made for my > Ornamental Mill. > > > > This jig is for making designs that are more OT looking. I can use a > number of different rosettes (round templates) to make a number of > different patterns. This is just a newer mod to what I used in this video > 2 years ago. https://www.youtube.com/watch?v=v5_TLeQQXeY > > > > Now the indexing part. > > In the past I removed a screw and counted holes in the indexing plate to > get my indexing. This jig, Makes the counting of hole obsolete (for the > most part.) by setting the bolts on the slide, I can make the indexing > much quicker and more accurate then what I could do with counting holes. > > I still need to count the holes and use the pin when setting up this jig, > but once set up, the pin will be used for a lock while cutting, and by > using the bolt/limit I can control the indexing of the part by using the > ratchet. > > > > If all goes well, this jig, should help me do some pretty neat things in > the future. ;-) > > > > Talk to you all more latter. > > Have a good day. > > > > C.A.G. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit https://groups.google.com/d/ > msgid/legacy-ornamental-mills/2032432793.1435172. > 1686500465910%40mail.yahoo.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/2032432793.1435172.1686500465910%40mail.yahoo.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit https://groups.google.com/d/ > msgid/legacy-ornamental-mills/LO0P265MB5285F4742D6CD4AD5D0E9 > ED1A857A%40LO0P265MB5285.GBRP265.PROD.OUTLOOK.COM > <https://groups.google.com/d/msgid/legacy-ornamental-mills/LO0P265MB5285F4742D6CD4AD5D0E9ED1A857A%40LO0P265MB5285.GBRP265.PROD.OUTLOOK.COM?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit https://groups.google.com/d/ > msgid/legacy-ornamental-mills/661452185.769283. > 1686520085081%40mail.yahoo.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/661452185.769283.1686520085081%40mail.yahoo.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CABP3DRGz-of81eVmfBSTFDbRVbM7Qo3HpkP52a_%3D7jEUPdLijw%40mail.gmail.com.
