ONE More note on this. 1000mm is 39 3/8" 1500 mm is 59' 1/16" Depending on the length of the LegacyYour prices may very. Here are two extremes on the same rail. https://www.amazon.com/CNCMANS-SFU1204-SBR16UU-Bearing-Coupling/dp/B09QPWYT4X/ref=sr_1_18?keywords=1500mm%2B16mm%2Blinear%2Brail&qid=1702256045&sr=8-18&th=1 $189.99
https://www.amazon.com/BestEquip-SBR16-1500mm-Bearings-forAutomated-Equipments/dp/B082SWP88Z/ref=sr_1_19?keywords=1500mm+16mm+linear+rail&qid=1702256292&sr=8-19 is $59.99 C.A.G. On Sunday, December 10, 2023 at 07:51:26 PM EST, 'Curt George' via Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com> wrote: Hello Ken Depending on you skills and what you want to make.As I see it.The biggest bang for your buck would be to put linear rail ontoany Legacy, with just a plunge router running on the rails like the 1000ex and 1500 modals had. It cost me something close to $100.00 back then TO add these rails. (BUT! Amazon has a sale on it now until Christmas. for $69.99)https://www.amazon.com/OrangeA-SBR16-1000mm-Automated-Machines-Equipments/dp/B07DL5Z9XQ/ref=sr_1_8?crid=242BLCK3QMCSJ&keywords=1000mm%2B16mm%2Blinear%2Brail&qid=1702255258&sprefix=1000mm%2B16mm%2Bleanear%2Brail%2Caps%2C92&sr=8-8&th=1 I put 16mm leaner rail onto my 1000ex. (here are 3 pix) The 16mmlooks like it was made for the Legacy. By using the Original router carriage and adding the slides only lifts the carriage up appx. 1" higher. So making a new bracket to hold the split-nut, Or making two new brackets to hold the Acme screw a bit higher, would be the only MOD's you would have to make.It was a very easy process for me. On my Legacy 2020 the hard part for me was to re-design the Z axis to work like the way I wanted it to work.It is something that I did, and I still am very happy with it today. If you want to know more, Just ask. ;-)Have a good night. C.A.G. On Sunday, December 10, 2023 at 07:16:53 PM EST, Ken and Diana <mman7...@gmail.com> wrote: I think that is a good question. Is there anyone out there willing to pursue such an endeavor??I wonder about the cost in today's market.Ken On Sun, Dec 10, 2023 at 7:13 PM RYAN JURGENS <rtjurg...@sbcglobal.net> wrote: Has anyone ever contacted Legacy and asked if blueprints could be obtained and permission granted to produce the Ornamental Mill machines? Being they no longer produce them, I wonder what their thinking would be. Sent from AT&T Yahoo Mail on Android On Mon, Dec 11, 2023 at 7:21 AM, cdkr...@gmail.com<cdkra...@gmail.com> wrote: The kicker for making an EVO would be to find someone with a CNC punch that could nibble out the essentials. I could fold and powder coat them. The rest would have to be pretty much off the shelf hardware, me thinks. A set of construction drawings would have to be made or obtained somehow. The copyright or patent issues shouldn't be a problem anymore, should they? I just mounted and tested a 3D printed plastic duplex gear to replace the acrylic one that broke off a tooth. It works smoothly and shows promise of being durable. Type of plastic unknown. I will have to machine a bushing because I screwed up the mounting so that the duplex wobbles unacceptably. Worst case is to make the "guide rails" found on almost all these skinny gears. DanK On Sunday, December 10, 2023 at 3:41:32 PM UTC-5 bulk...@mmnet.com.au wrote: Anything is possible 😊 Bill From: legacy-orna...@googlegroups.com <legacy-orna...@googlegroups.com> On Behalf Of Tim Ziegler Sent: Monday, December 11, 2023 4:48 AM To: legacy-orna...@googlegroups.com Subject: Re: Look what I found on the Russian web site. ;-) Maybe we should get together and build one Bill. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty Ziegler Laser Worx LLC 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sun, Dec 10, 2023 at 2:43 AM <bulk...@mmnet.com.au> wrote: The evo was a good mill I think it had faults as all mills do I wish I had had the opportunity to play on one Bill From: 'Curt George' via Legacy Ornamental Mills <legacy-orna...@googlegroups.com> Sent: Sunday, December 10, 2023 4:40 PM To: Legacy ornamental mills <legacy-orna...@googlegroups.com> Subject: Look what I found on the Russian web site. ;-) https://www.youtube.com/watch?v=ViUos4Tgs3w Form Years gone by. I wish that I had a chance to see this machine first hand. Today I think, Just maybe I was wrong about the EVO. Sadly it was never meant to be. Let's hear what you all think? C.A.G. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/630768650.431271.1702186822290%40mail.yahoo.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/000001da2b44%24e2a510d0%24a7ef3270%24%40mmnet.com.au. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGZx%2BAxtfTDdNdxmXU6u9kuWjOp5zVL0k%3DRMrhpvL3HOg%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/2e3d9117-4b23-4a6b-aa2a-e1cada315a9cn%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/1294374227.409350.1702253581967%40mail.yahoo.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAE5s5ctqnC5CFJUrUtu790XzbRaWGspUzwZ47AwkzRHjUEAeqg%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/481486644.1341763.1702255870383%40mail.yahoo.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/277381108.1339861.1702256479519%40mail.yahoo.com.
