Well, Curt, if there's something wrong with that handle, only you would know. Nice recovery and the shape is interesting too! DanK
On Wednesday, February 21, 2024 at 1:09:21 PM UTC-5 Ken and Diana wrote: > I think that is beautiful. Thanks for sharing. > Ken > > On Wed, Feb 21, 2024 at 11:59 AM 'Curt George' via Legacy Ornamental Mills > <legacy-orna...@googlegroups.com> wrote: > >> Thank you Bill. >> >> Taking photo's of a white bone handle doesn't always come out well in the >> photos. >> And in truth, the indexing gear slipped so my flutes are off-set. since >> they are next to a rope >> sorta make it work, but if the rope cut was not there, this turning most >> likely would have ended up >> as garbage. SO the concept, "Form Trash to treasure" ,works for me. ;-) >> >> Have a great day. >> >> C.A.G.[image: Inline image] >> >> On Monday, February 19, 2024 at 11:24:57 PM EST, <bulk...@mmnet.com.au> >> wrote: >> >> >> Very nice curt I particularly like the lovely even white of the bone, >> perhaps the flats could be a little more pronounce they are a little hard >> to see >> >> But other than that a A1 job very nice. >> >> >> >> Bill >> >> >> >> *From:* 'Curt George' via Legacy Ornamental Mills < >> legacy-orna...@googlegroups.com> >> *Sent:* Tuesday, February 20, 2024 12:31 PM >> *To:* legacy-orna...@googlegroups.com >> *Subject:* Re: New hand made Stainless Steel templates >> >> >> >> Hey Guys. >> >> >> >> Unless there are some more people talking on this posting, I think I will >> let it drop for the time being. >> >> Today I did another bone turning, that, Over all I am pretty happy with. >> >> >> >> Bye the way, I counted all my Stainless steel templates that I made over >> the last two weeks, I have 14 templates. I was having so much fun, I forgot >> how many that I made. ;-) This bone turning was made form last >> >> Thursday's lunch time break, template. >> >> I roped the center part, and then fluted the two outside beads, and >> leaving the end beads just round. >> >> As I said earlier, I am pretty happy with this one. "Yes" there are some >> small errors in the process but, Perhaps >> >> I am just to picky with my own work? >> >> "O"Well, I'm having fun. ;-) Another one down, appx. 30 more blanks left >> to do before I run out of bone disks. >> >> >> >> Have a good night everyone. >> >> >> >> C.A.G. >> >> >> >> On Sunday, February 18, 2024 at 09:50:10 PM EST, Tim Ziegler < >> timjz...@gmail.com> wrote: >> >> >> >> >> >> Had the same problem today and yesterday. Tax time and boy its hectic. >> uffda. >> >> >> Kind Regards, >> >> >> >> Timothy J. Ziegler >> >> Ziegler WoodWork & Specialty >> >> Ziegler Laser Worx LLC >> >> 14171 160th Ave. >> >> Foreston MN 56330 >> >> >> >> 320-294-5798 <(320)%20294-5798> shop >> >> 320-630-2243 <(320)%20630-2243> cell >> >> >> >> >> >> On Sun, Feb 18, 2024 at 4:16 PM 'Curt George' via Legacy Ornamental Mills >> <legacy-orna...@googlegroups.com> wrote: >> >> Thank you Bill >> >> >> >> I got some time in the shop this afternoon. (between grocery shopping >> and laundry. I hate when LIFE get in the way of my wants. ) ;-) >> >> >> >> More life stuff now. >> >> talk to you more latter. >> >> >> >> here are the pix. >> >> C.A.G. >> >> On Sunday, February 18, 2024 at 05:10:38 PM EST, <bulk...@mmnet.com.au> >> wrote: >> >> >> >> >> >> Yes very nice video on template following that one an option of the >> legacy quite often overlooked >> >> >> >> Bill >> >> >> >> *From:* 'Curt George' via Legacy Ornamental Mills < >> legacy-orna...@googlegroups.com> >> *Sent:* Monday, February 19, 2024 3:45 AM >> *To:* legacy-orna...@googlegroups.com >> *Subject:* Re: New hand made Stainless Steel templates >> >> >> >> Hello Everyone. >> >> I took these photo's out of a Wood Chuck training video, named Profile >> following. They show the template follower being used to make these 5 >> spindles, The neat thing here is they only used one very simple wooden >> template to make all 5 spindles. >> >> The template is just a general guide you can use it to make a copy of the >> original or use for the general profile to make something different. in the >> last photo you can see that all, are different but share the same basic >> shape. By using different router bits, and cutting concepts (roping or >> fluting) the look can and will change. >> >> The ribbon twist (second for the right in the last photo.) is the most >> >> dramatic, this cut was made from cutting form the side, using both a >> large straight fluted cutter, and using a LONG Pitch . >> >> https://www.youtube.com/watch?v=YkGSMtixW1c&t=2s Bill made this video a >> few years back, showing the concept. >> >> >> >> Have a good day. >> >> C.A.G. >> >> On Saturday, February 17, 2024 at 06:16:50 PM EST, Curt George < >> curt....@yahoo.com> wrote: >> >> >> >> >> >> Hey Jeff, >> >> using the template follower on the Legacy is not hard, but you will have >> to get use to cutting from the side of the work, to make the profiles. >> >> Here are a few Legacy Photo's on this concept. >> >> >> >> C.A.G. >> >> >> >> On Saturday, February 17, 2024 at 03:03:46 PM EST, Jeff Richmond < >> jtric...@gmail.com> wrote: >> >> >> >> >> >> Yes, you gave a quick reply within another message but thanks Curt for >> taking the time to provide additional detail. I have not used my Legacy for >> template work but I hope to. >> >> >> >> Jeff from Connecticut >> >> Sent from my iPhone >> >> >> >> On Feb 17, 2024, at 12:16 PM, 'Curt George' via Legacy Ornamental Mills < >> legacy-orna...@googlegroups.com> wrote: >> >> Hello Jeff, I thought I replied to you, but after looking an this >> posting I can find the reply. >> >> Depending on which machine I am using. both of my Legacy's use a ball >> bearing set ,1/2" as the follower. >> >> My lathe uses different shaped followers depending on the cutter that I >> am using. >> >> As I see it the Lathe is for exact coping/fine details, where the Legacy >> is for just basic shapes. details can be >> >> added with the Legacy, but those details are done with the router bits >> profile. so as long as my templates are true >> >> to the spindle, they do not need to be beyond just basic shapes. >> >> Note: having said that, I use both machine together on most of my >> projects. >> >> >> >> At this time, I am using my 200 more then my 1000, This is because of >> two reasons. First the 200 is made for smaller >> >> turnings, I can cut/rope finer on my 200 then I can do on my 1000 ( note: >> not only size, but the 200 has a finer acme screw drive. 5/8-8 and the >> >> 1000 has a 5/8-4 acmes screw.) But for larger turnings 1000 is the king >> of the shop. and for very large turnings the lathe is the master. >> >> (I can turn up to 8' on my lathe) BUT having said that, for what I >> normally do/make in the shop I can use and do use all my tool together to >> get >> >> the best quality of workmanship as I can. >> >> I hope this helps explain what I am doing, and answers your questions. >> >> >> >> I made another 4 templates over the last two days. >> >> If I can get my shop wormed up today, I hope to be able to be able to >> play with some of these new templates. >> >> Wish me luck. ;-) and talk to you more later. >> >> >> >> NOTE: I am adding two pix. of my fine adjustment/template follower that I >> made for my 200 >> >> >> >> Have a good day. >> >> >> >> C.A.G. >> >> On Monday, February 12, 2024 at 8:10:35 AM UTC-5 jtric...@gmail.com >> wrote: >> >> Nice, thanks for sharing Curt. >> >> >> >> What do you use for a stylus to contact the template? >> >> >> >> Jeff from Connecticut >> >> Sent from my iPhone >> >> >> >> On Feb 12, 2024, at 12:44 AM, 'Curt George' via Legacy Ornamental Mills < >> legacy-orna...@googlegroups.com> wrote: >> >> >> >> Hello Everyone. >> >> >> >> I had some free time today, so I made these templates for my Legacy, Only >> one has been tested so far, but I do think most of these should work well >> for my uses. >> >> >> >> I can use these templates on All of my wood working equipment, both of my >> Legacy's as well the lathes I own. >> >> >> >> Note: I see and use templates not as the final part of turning, but as a >> general guide for basic shaping of my spindles. >> >> >> >> Making stainless steel templates is not all that hard, by using an >> abrasive cutting wheel, and some hand files + a wire wheel to remove any >> burs... the process is pretty easy. (If anyone wants to know more, Please >> ask.) >> >> Tomorrow I hope to be able to try some of these out on some of my bone >> turning. >> >> Have a good night everyone. >> >> >> >> C.A.G. >> >> -- >> >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/1658975447.644324.1707716637560%40mail.yahoo.com >> >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/1658975447.644324.1707716637560%40mail.yahoo.com?utm_medium=email&utm_source=footer> >> . >> >> <SS templates1.jpg> >> >> <SS templates2.jpg> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/913f68c4-6da0-4cc4-b179-711370e467ban%40googlegroups.com >> >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/913f68c4-6da0-4cc4-b179-711370e467ban%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> >> <Supper 200 fine adj and counter b.JPG> >> >> <Suppe 200 fine adjustment1.JPG> >> >> -- >> You received this message because you are subscribed to a topic in the >> Google Groups "Legacy Ornamental Mills" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/legacy-ornamental-mills/zH0j0tczOYE/unsubscribe >> . >> To unsubscribe from this group and all its topics, send an email to >> legacy-ornamental...@googlegroups.com. >> To view this discussion on the web visit >> >> >> https://groups.google.com/d/msgid/legacy-ornamental-mills/36A65F1B-5A4D-4F83-B40D-75EA02FD8D59%40gmail.com >> >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/36A65F1B-5A4D-4F83-B40D-75EA02FD8D59%40gmail.com?utm_medium=email&utm_source=footer> >> >> . >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/1757192635.2152291.1708274713806%40mail.yahoo.com >> >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/1757192635.2152291.1708274713806%40mail.yahoo.com?utm_medium=email&utm_source=footer> >> . >> >> -- >> You received this message because you are subscribed to a topic in the >> Google Groups "Legacy Ornamental Mills" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/legacy-ornamental-mills/zH0j0tczOYE/unsubscribe >> . >> To unsubscribe from this group and all its topics, send an email to >> legacy-ornamental...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/002001da62b7%24481b3210%24d8519630%24%40mmnet.com.au >> >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/002001da62b7%24481b3210%24d8519630%24%40mmnet.com.au?utm_medium=email&utm_source=footer> >> . >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/1832174265.2205695.1708294594751%40mail.yahoo.com >> >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/1832174265.2205695.1708294594751%40mail.yahoo.com?utm_medium=email&utm_source=footer> >> . >> >> -- >> You received this message because you are subscribed to a topic in the >> Google Groups "Legacy Ornamental Mills" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/legacy-ornamental-mills/zH0j0tczOYE/unsubscribe >> . >> To unsubscribe from this group and all its topics, send an email to >> legacy-ornamental...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFo6xFDBZyyOG45vau1pdYjs0H4221Eo4-7VwZpjYEfkw%40mail.gmail.com >> >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFo6xFDBZyyOG45vau1pdYjs0H4221Eo4-7VwZpjYEfkw%40mail.gmail.com?utm_medium=email&utm_source=footer> >> . >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/498748726.2492190.1708392643185%40mail.yahoo.com >> >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/498748726.2492190.1708392643185%40mail.yahoo.com?utm_medium=email&utm_source=footer> >> . >> >> -- >> You received this message because you are subscribed to a topic in the >> Google Groups "Legacy Ornamental Mills" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/legacy-ornamental-mills/zH0j0tczOYE/unsubscribe >> . >> To unsubscribe from this group and all its topics, send an email to >> legacy-ornamental...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/000001da63b4%24bbc7af60%2433570e20%24%40mmnet.com.au >> >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/000001da63b4%24bbc7af60%2433570e20%24%40mmnet.com.au?utm_medium=email&utm_source=footer> >> . >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental...@googlegroups.com. >> > To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/1851183984.2930714.1708534745405%40mail.yahoo.com >> >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/1851183984.2930714.1708534745405%40mail.yahoo.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/21fad5e5-0fbe-4289-bfd3-0e6a4ae8b5cen%40googlegroups.com.
