Thank you all for the kind words.
Tim. this was made form the stainless steel template. So I will keep it here.
I said that I would let this topic rest for the time being. So this should be
the last posting on this topic for a while.
Have a good night everyone.
C.A.G.
On Wednesday, February 21, 2024 at 05:45:43 PM EST, Ed Trevillian
<edn...@gmail.com> wrote:
Curt,That looks like a very finely crafted handle to me. Perhaps what you see
as a flaw, most of us view as a handcrafted, beautiful object. It is CERTAINLY
NOT TRASH !Keep up the good work !Ed Trevillian
On Wed, Feb 21, 2024, 11:59 AM 'Curt George' via Legacy Ornamental Mills
<legacy-ornamental-mills@googlegroups.com> wrote:
Thank you Bill.
Taking photo's of a white bone handle doesn't always come out well in the
photos.And in truth, the indexing gear slipped so my flutes are off-set. since
they are next to a ropesorta make it work, but if the rope cut was not there,
this turning most likely would have ended up as garbage. SO the concept,
"Form Trash to treasure" ,works for me. ;-)
Have a great day.
C.A.G.
On Monday, February 19, 2024 at 11:24:57 PM EST, <bulke...@mmnet.com.au>
wrote:
Very nice curt I particularly like the lovely even white of the bone, perhaps
the flats could be a little more pronounce they are a little hard to see
But other than that a A1 job very nice.
Bill
From: 'Curt George' via Legacy Ornamental Mills
<legacy-ornamental-mills@googlegroups.com>
Sent: Tuesday, February 20, 2024 12:31 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New hand made Stainless Steel templates
Hey Guys.
Unless there are some more people talking on this posting, I think I will let
it drop for the time being.
Today I did another bone turning, that, Over all I am pretty happy with.
Bye the way, I counted all my Stainless steel templates that I made over the
last two weeks, I have 14 templates. I was having so much fun, I forgot how
many that I made. ;-) This bone turning was made form last
Thursday's lunch time break, template.
I roped the center part, and then fluted the two outside beads, and leaving the
end beads just round.
As I said earlier, I am pretty happy with this one. "Yes" there are some small
errors in the process but, Perhaps
I am just to picky with my own work?
"O"Well, I'm having fun. ;-) Another one down, appx. 30 more blanks left to do
before I run out of bone disks.
Have a good night everyone.
C.A.G.
On Sunday, February 18, 2024 at 09:50:10 PM EST, Tim Ziegler
<timjzieg...@gmail.com> wrote:
Had the same problem today and yesterday. Tax time and boy its hectic. uffda.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
Ziegler Laser Worx LLC
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Sun, Feb 18, 2024 at 4:16 PM 'Curt George' via Legacy Ornamental Mills
<legacy-ornamental-mills@googlegroups.com> wrote:
Thank you Bill
I got some time in the shop this afternoon. (between grocery shopping and
laundry. I hate when LIFE get in the way of my wants. ) ;-)
More life stuff now.
talk to you more latter.
here are the pix.
C.A.G.
On Sunday, February 18, 2024 at 05:10:38 PM EST, <bulke...@mmnet.com.au> wrote:
Yes very nice video on template following that one an option of the legacy
quite often overlooked
Bill
From: 'Curt George' via Legacy Ornamental Mills
<legacy-ornamental-mills@googlegroups.com>
Sent: Monday, February 19, 2024 3:45 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New hand made Stainless Steel templates
Hello Everyone.
I took these photo's out of a Wood Chuck training video, named Profile
following. They show the template follower being used to make these 5 spindles,
The neat thing here is they only used one very simple wooden template to make
all 5 spindles.
The template is just a general guide you can use it to make a copy of the
original or use for the general profile to make something different. in the
last photo you can see that all, are different but share the same basic shape.
By using different router bits, and cutting concepts (roping or fluting) the
look can and will change.
The ribbon twist (second for the right in the last photo.) is the most
dramatic, this cut was made from cutting form the side, using both a large
straight fluted cutter, and using a LONG Pitch .
https://www.youtube.com/watch?v=YkGSMtixW1c&t=2s Bill made this video a few
years back, showing the concept.
Have a good day.
C.A.G.
On Saturday, February 17, 2024 at 06:16:50 PM EST, Curt George
<curt.geo...@yahoo.com> wrote:
Hey Jeff,
using the template follower on the Legacy is not hard, but you will have to get
use to cutting from the side of the work, to make the profiles.
Here are a few Legacy Photo's on this concept.
C.A.G.
On Saturday, February 17, 2024 at 03:03:46 PM EST, Jeff Richmond
<jtrichmo...@gmail.com> wrote:
Yes, you gave a quick reply within another message but thanks Curt for taking
the time to provide additional detail. I have not used my Legacy for template
work but I hope to.
Jeff from Connecticut
Sent from my iPhone
On Feb 17, 2024, at 12:16 PM, 'Curt George' via Legacy Ornamental Mills
<legacy-ornamental-mills@googlegroups.com> wrote:
Hello Jeff, I thought I replied to you, but after looking an this posting I
can find the reply.
Depending on which machine I am using. both of my Legacy's use a ball bearing
set ,1/2" as the follower.
My lathe uses different shaped followers depending on the cutter that I am
using.
As I see it the Lathe is for exact coping/fine details, where the Legacy is for
just basic shapes. details can be
added with the Legacy, but those details are done with the router bits profile.
so as long as my templates are true
to the spindle, they do not need to be beyond just basic shapes.
Note: having said that, I use both machine together on most of my projects.
At this time, I am using my 200 more then my 1000, This is because of two
reasons. First the 200 is made for smaller
turnings, I can cut/rope finer on my 200 then I can do on my 1000 ( note: not
only size, but the 200 has a finer acme screw drive. 5/8-8 and the
1000 has a 5/8-4 acmes screw.) But for larger turnings 1000 is the king of the
shop. and for very large turnings the lathe is the master.
(I can turn up to 8' on my lathe) BUT having said that, for what I normally
do/make in the shop I can use and do use all my tool together to get
the best quality of workmanship as I can.
I hope this helps explain what I am doing, and answers your questions.
I made another 4 templates over the last two days.
If I can get my shop wormed up today, I hope to be able to be able to play with
some of these new templates.
Wish me luck. ;-) and talk to you more later.
NOTE: I am adding two pix. of my fine adjustment/template follower that I made
for my 200
Have a good day.
C.A.G.
On Monday, February 12, 2024 at 8:10:35 AM UTC-5 jtric...@gmail.com wrote:
Nice, thanks for sharing Curt.
What do you use for a stylus to contact the template?
Jeff from Connecticut
Sent from my iPhone
On Feb 12, 2024, at 12:44 AM, 'Curt George' via Legacy Ornamental Mills
<legacy-orna...@googlegroups.com> wrote:
Hello Everyone.
I had some free time today, so I made these templates for my Legacy, Only one
has been tested so far, but I do think most of these should work well for my
uses.
I can use these templates on All of my wood working equipment, both of my
Legacy's as well the lathes I own.
Note: I see and use templates not as the final part of turning, but as a
general guide for basic shaping of my spindles.
Making stainless steel templates is not all that hard, by using an abrasive
cutting wheel, and some hand files + a wire wheel to remove any burs... the
process is pretty easy. (If anyone wants to know more, Please ask.)
Tomorrow I hope to be able to try some of these out on some of my bone turning.
Have a good night everyone.
C.A.G.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/1658975447.644324.1707716637560%40mail.yahoo.com.
<SS templates1.jpg>
<SS templates2.jpg>
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/913f68c4-6da0-4cc4-b179-711370e467ban%40googlegroups.com.
<Supper 200 fine adj and counter b.JPG>
<Suppe 200 fine adjustment1.JPG>
--
You received this message because you are subscribed to a topic in the Google
Groups "Legacy Ornamental Mills" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/legacy-ornamental-mills/zH0j0tczOYE/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/36A65F1B-5A4D-4F83-B40D-75EA02FD8D59%40gmail.com
.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/1757192635.2152291.1708274713806%40mail.yahoo.com.
--
You received this message because you are subscribed to a topic in the Google
Groups "Legacy Ornamental Mills" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/legacy-ornamental-mills/zH0j0tczOYE/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/002001da62b7%24481b3210%24d8519630%24%40mmnet.com.au.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/1832174265.2205695.1708294594751%40mail.yahoo.com.
--
You received this message because you are subscribed to a topic in the Google
Groups "Legacy Ornamental Mills" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/legacy-ornamental-mills/zH0j0tczOYE/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFo6xFDBZyyOG45vau1pdYjs0H4221Eo4-7VwZpjYEfkw%40mail.gmail.com.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/498748726.2492190.1708392643185%40mail.yahoo.com.
--
You received this message because you are subscribed to a topic in the Google
Groups "Legacy Ornamental Mills" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/legacy-ornamental-mills/zH0j0tczOYE/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/000001da63b4%24bbc7af60%2433570e20%24%40mmnet.com.au.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/1851183984.2930714.1708534745405%40mail.yahoo.com.
--
You received this message because you are subscribed to a topic in the Google
Groups "Legacy Ornamental Mills" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/legacy-ornamental-mills/zH0j0tczOYE/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAL8Pmr0SFcBnB2Qwo7xS2HOZs9XyUfTds0_0nkkApLxqGTAnFg%40mail.gmail.com.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/672910070.3104181.1708583213653%40mail.yahoo.com.
