Bill, Very nice of you to post that - much appreciated. For some of the examples of the "diamond" carve it appears to be fairly close to the pineapple - and on the others you can definitely tell the difference.
Cheers Mac -----Original Message----- From: <legacy-ornamental-mills@googlegroups.com> Sent: May 20, 2024 3:56 AM To: <legacy-ornamental-mills@googlegroups.com> Subject: difference between a pineapple pattern and a dimond pattern A few days ago I was discussing different legacy spindle patterns with someone and the subject of diamond and pineapple patterns came up And I was asked is there any difference well yes there is each one is milled with a different router bit and I don’t think this has ever been addressed here before, the pineapple pattern is milled with rope molding router bits while the diamond pattern is milled with strait V groove router bits Here is a sheet showing the difference. Bill -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com (mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com). To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/000801daaa8b%24294959e0%247bdc0da0%24%40mmnet.com.au. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/a685dd8a-605e-7ae4-891d-24d67b0e392d%40earthlink.net.
