@Bruce, When I checked there was already a rule, but I'm not sure if the
address and other constants are correct or not
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.
# net device e1000e
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*",
ATTR{address}=="38:60:77:26:50:e3", ATTR{dev_id}=="0x0", ATTR{type}=="1",
KERNEL=="en*", NAME="eth0"
@Fernando
root:/# ls /sys/class/net/
eth0 lo
On Tue, Feb 18, 2014 at 10:51 PM, Fernando de Oliveira
<fam...@yahoo.com.br>wrote:
> Em 18-02-2014 13:55, Bruce Dubbs escreveu:
> > Fernando de Oliveira wrote:
> >> Em 18-02-2014 12:49, Pierre Labastie escreveu:
> >>> Le 18/02/2014 16:26, Oshadha Gunawardena a écrit :
> >>>> Hi again all,
> >>>>
> >>>> I have completed my LFS build. And I wanted to install dhcpcd. So as
> >>>> in the BLFS I have followed every step and it seems everything went
> well
> >>>>
> >>>> *make install-service-dhcpcd*
> >>>> install -d -m 755 /lib/services
> >>>> install -m 754 blfs/services/dhcpcd /lib/services
> >>>>
> >>>> *cat /etc/sysconfig/ifconfig.eth0 *
> >>>>
> >>>> ONBOOT="yes"
> >>>> IFACE="eth0"
> >>>> SERVICE="dhcpcd"
> >>>> DHCP_START="-b -q"
> >>>> DHCP_STOP="-k"
> >>>>
> >>>> Once I boot in to the system it does not starting up automatically. I
> >>>> always has to run the "dhcpcd" to get it up. So I'm wondering what
> >>>> maybe the issue.
> >>>>
> >>> Just guessing here.
> >>> Do you have any other file beginning with ifconfig in /etc/sysconfig?
> >>> If there is one, does it have ONBOOT=no?
> >>> Now coming to dhcpcd. Does it start when running:
> >>> ---
> >>> ifup eth0
> >>> ---
> >>> instead of dhcpcd?
> >>
> >> Good point.
> >>
> >> My previous LFS-7.4, had the interface named enp2s1:
> >>
> >> /etc/sysconfig/ifconfig.enp2s1
> >>
> >> My new LFS-7.5-rc1: eno16777736
> >>
> >> /etc/sysconfig/ifconfig.eno16777736
> >
> >
> > You need to change IFACE="eno16777736"
>
> Thanks. I did it yesterday. I wrote all that trying to help Oshadha, He
> replied that there is no other file starting with ifconfig and probably
> it shouldn't, even mor sure, after reading what you wrote further below.
> He needs to search another place:
>
> ls /sys/class/net/
>
> > Or create a rule like:
> >
> > $ cat /etc/udev/rules.d/70-persistent-net.rules
> > # This file was automatically generated by the /lib/udev/write_net_rules
> > # program, run by the persistent-net-generator.rules rules file.
> > #
> > # You can modify it, as long as you keep each rule on a single
> > # line, and change only the value of the NAME= key.
> >
> > # net device e1000e
> > SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*",
> > ATTR{address}=="00:25:64:38:ec:dd", ATTR{dev_id}=="0x0",
> > ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
> >
> > Note 1: Change the address as appropriate. You may also need to change
> > KERNEL to "en*".
>
> Thanks.
>
> >
> > Note 2: The extension on the ifconfig file is irrelevant for the
> > scripts. It only needs to be relevant to you.
>
> I always forget this part. Thanks.
>
> --
> []s,
> Fernando
> --
> http://linuxfromscratch.org/mailman/listinfo/lfs-support
> FAQ: http://www.linuxfromscratch.org/lfs/faq.html
> Unsubscribe: See the above information page
>
--
http://linuxfromscratch.org/mailman/listinfo/lfs-support
FAQ: http://www.linuxfromscratch.org/lfs/faq.html
Unsubscribe: See the above information page
