Date: Tue, 04 Jul 2000 16:41:10 -0700
From: Karen Reynolds <[EMAIL PROTECTED]>
Subject: Re: Enhanced docking port
Giles:
>You just switch the Libretto off, turn it upside down and slide the
>cover back over the connector, then push fit it onto the enhanced
>port replicator.
I did.... that was the easy part :-)
>To attach mains power, you plug your Libretto power lead in to the
>socket on the enhanced port replicator.
Figured out that one too!
>All the ports on the docking station should work automatically.
Well, now here is where the fun began.... I had just done a clean
install of W98 and got everything working great.... so decided it was
time for the next step... the enhanced dock...
When I booted up, it 'found new hardware' and installed a BUNCH
of stuff from the W98 folder (which I have on the last partition of
the hdd).... after that was all over and the desktop was up.... when
I would click on a menu, it wouldn't stay open; when I clicked on
stuff to start, other things would start instead.
It acted very unstable and unhappy. Going into Device Mgr it all
looked ok.... d clicked on the 'Computer' and there was about 8 to
12 devices under interrupt 11.... I shut it off at that point.
So I don't know what I did... or if there was something I should
have done first.
I guess I'll have to contact Toshiba and see if I can get my hands
on the instructions that came with the dock... I just hoped that
someone here would have them.
Karen
gg
**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ
-------UNSUBSCRIBE-------
mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe
--------UNSUBSCRIBE DIGEST------
Use above but add DIGEST to the subject line...
**************************************************************
