Date: Mon, 02 Apr 2001 07:26:37 From: "neil barnes" <[EMAIL PROTECTED]> Subject: H Re: Libretto 50CT pcmcia wireless network card possibilities >To the point: On insertion, the wvlan_cs module tells me `Bad Vcc', so I >guess that the Lib50 can't give a 3.3volt supply to the card. Is this >correct? >The Lib50 pcmcia slot will only run 5volt cards? If so, are there any >802.11[preferably 11b] cards available which _do_ work in the Lib50 under >Linux? (e.g. Lucent, Buffalo etc?) > >I hope this isn't a faq.. :( > > Many thanks > > David I can't answer the question but I think I can safely say it hasn't been *frequently* asked! Neil _________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------UNSUBSCRIBE------- mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe --------UNSUBSCRIBE DIGEST------ Use above but add DIGEST to the subject line... **************************************************************