Date: Sun, 21 Oct 2001 07:26:27 -0400 From: "Lawrence Young" <[EMAIL PROTECTED]> Subject: Re: [LIB] re: 110ct/memory upgrade/RTC battery
----- Original Message ----- From: "Richard Waters" <[EMAIL PROTECTED]> To: "Libretto" <[EMAIL PROTECTED]> Sent: Friday, October 19, 2001 9:24 PM Subject: [LIB] re: 110ct/memory upgrade/RTC battery > Date: Fri, 19 Oct 2001 21:19:15 -0400 > From: Richard Waters <[EMAIL PROTECTED]> > Subject: re: 110ct/memory upgrade/RTC battery > > I just picked up a 110ct from e-bay and a 32 meg memory upgrade (Kingston > technology KTT-LBT/32) > > I followed the instruction to take off the keyboard, but when I went to put > the memory module in the laptop, the RTC battery was where the module would > go. The memory module did not seem to lie flat on top of the battery. > > I checked the archive and see no questions on this. I am wondering: > > 1) Is this the right memory module? This is the correct module > 2) Is this where the battery should be (or did some one do a cheesy > replacement )? You're right. RTC battery should no be there. > 3) Is the problem just me being a klutz? > > any help would be appreciated. > > > > > ************************************************************** > http://libretto.basiclink.com - Libretto mailing list > http://libretto.basiclink.com/archive - Archives > http://www.picante.com/~gtaylor/portable/faq.html - FAQ > -------TO UNSUBSCRIBE------- > Reply to any of the list messages. The reply mail should be > addressed to: [EMAIL PROTECTED] - Then replace any text > on the message's subject line: cmd:unsubscribe > --------TO UNSUBSCRIBE DIGEST------ > Do above but with this on subject line: cmd:unsubscribe digest > ************************************************************** > ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************