Date: Sat, 27 Apr 2002 12:21:07 -0500 From: "John Musielewicz" <[EMAIL PROTECTED]> Subject: Re: [LIB] 50CT LCD
> >o if you put disks wider than 8.5mm in a 50 case, you need to remove the > >transparent and white spacers from the case back. > > What... some 70s have a wide enough to accept 9.5mm HDDs without > modification? I had to remove those spacers on my L70 when I put this 20GB > HDD in. Could it have had a 50 case bottom? Anyone else installing 9.5 mm drives in a 70 experience this? > > >o There are instances where software which works on the 50 won't work on > >the 70. We haven't been able to prove it, but it may be that the MMS > >intructions on the 70 pentium are the cause. > > Well... I've tested, tested again, and then tested some more, and my L70 > just won't boot with my Xircom combo modem inserted while it's drivers, and > the Toshiba Power Saver drivers are installed. Put the same HDD in my L50, > and no problems. And the L50's 6,4GB HDD/Win98 OS setup has no problems > with this either. > > If I could find out what resources the Power Saver is using, I might be able > to tweak the Xircom drivers to let the system boot with the modem inserted. > It works fine inserting it AFTER boot. This is a good question. Also is there anyway to uninstall the power saver after installing it? ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
