Date: Wed, 29 May 2002 10:27:42 +0200 From: Christian Gennerat <[EMAIL PROTECTED]> Subject: Re: [LIB] l110 ps
Raymond a écrit : > Date: Sun, 26 May 2002 09:12:30 +0800 > From: Raymond <[EMAIL PROTECTED]> > Subject: Re: [LIB] l110 ps > > > > Actually, Chester and Gennadiy aren't quite accurate on this ... You can > use ANY 15 volt DC power supply as long as its rated at 1.5 amps or above > (I think the stock Toshiba PSU is rated at 2.5A but I've not seen the libby > draw more than 1.5A except maybe on peak). The only sticking point is that > connector. The L50/70 and L100/110 (and for that matter, the Portege) power > supplies are identical. If you cut the connectors off an L50/70 and a > L100/110 power supply, you couldn't tell the difference between them, both > are 15V 2.5A DC switchmode. > > That's why i made a small box http://libxg.free.fr/adapt.htm And I have 2 power supplies, One at office, one at home and my Libretti are charging alternatively with each one ! -- The falsely dramatic drives out the truly dull. ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************