Date: Thu, 3 Jun 2004 11:53:33 +0100 From: barnacle <[EMAIL PROTECTED]> Subject: Re: [LIB] 50/70 plug dimensions part# needed
On Saturday 29 May 2004 21:56, you wrote: > Date: Sat, 29 May 2004 03:53:48 +0000 > From: "Matt Hanson" <[EMAIL PROTECTED]> > Subject: Re: [LIB] 50/70 plug dimensions part# needed > > From: barnacle <[EMAIL PROTECTED]> > > >The *male* connectors are available from www.cpc.co.uk - part number > >CN0572566 > >- 2.5mm centre hole, 6.25mm outer diameter, 9mm length. They have a > >matching > >inline socket CN0649066 as far as I can see. > > Heya Neil! > > Are you sure that's not a 5.5mm outer diameter? I don't have calipers to > measure it, but I don't get any search hits on "2.5mm 6.25mm coaxial plug", > though lots for "2.5mm 5.5mm coaxial plug". Seems CPC only wants to list > the measurement for the i.d.. > > I think these US companies have the "female" (female/male ... male/female > ... androgynous??) connector I'm after, but they are 2.5mm x 5.5mm. These > all look the same: > > http://www.plaza101.com/plaza/search/res/r6693923.html > > http://www.unicornelex.com/newunicorn/detail.php?itemno=23-4805&&PHPSESSID= >938d945d08c881563c3a950403de59eb > > http://www.cablesandconnectors.com/PIX/phi62.jpg > > Think this is the right animal? Funny Digi-Key has the screwy 100/110 male > plug, but only seems to have the board mount connector to fit the 50/70 > male plug. > No. Definitely 6.25mm; just calipered the original PSU connector and the CPC plug, of which I have a handful. You want me to get a couple of sockets? I have to buy a few bits and bobs anyway and may as well get them from CPC as RA or Farnells :) and I'm expecting to be back in Florida in three or four weeks. Mail me off list on the hotmail address... Neil ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
