Date: Fri, 25 Feb 2005 23:16:30 -0800 (PST) From: Matt Hanson <[EMAIL PROTECTED]> Subject: Re: [LIB] Can anybody help me?
Hi Giovanni, The only thing I can think of is that the display cable may need re-seating. If you lift the small plastic bar at the top of the keyboard, you can access the screw that holds it down. After that's off, there's two screws on either side (left and right) that hold the keyboard grounding straps down. The flat keyboard cable is removed by using a small watch screwdriver to push the lock tabs on the cable socket towards the display. Push a little on one side, then the other, than back and forth until the lock releases the cable. I think there are two more screws that hold the heat tin down. Take those off, and you can access the display cable. Disconnect it and re-connect it a few times. You might also want to do the same with the explansion memory card if you have one. It's on the left side with one screw holding it down. If no luck there... maybe someone else on the list will have some other ideas. Matt --- Giovanni Bagnoli <[EMAIL PROTECTED]> wrote: > Date: Thu, 24 Feb 2005 12:13:14 +0100 > From: "Giovanni Bagnoli" <[EMAIL PROTECTED]> > Subject: Can anybody help me? > > Hi, > > I'm giovanni bagnoli, I have a libretto CT50. After a lot of time (about > 2 > years) I have tried to relight the computer. > > The result has been that the power led is ignited, the hard disk led too > but > does not ignite the video and computer doesn't start. > > It can be the battery cmos? > > Does anybody have other idea? > > Thanks > > giovanni __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
