Hi, John:
Thanks. Though the problem for me is still the same.
I tried in uboot with following commands.
# mmc init
# setenv bootargs 'console=ttyO2,115200n8 mem=256M
root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait init=/init'
# fatload mmc 1 0x82000000 uImage
# bootm 0x82000000
Any idea about if there could be any other difference in between? Thanks.
Regards,
-Jeremy
On Thu, Mar 3, 2011 at 7:30 AM, John Stultz <[email protected]> wrote:
> On Thu, 2011-03-03 at 02:47 +0800, Jeremy Chang wrote:
>> Hi John:
>> Actually I didn't mean to enable EARLY_PRINTK in .config. Actually
>> I only used the android_omap3_defconfig, and I found I can not see the
>> terminal messages so I tried to enable EARLY_PRINTK to see if there're
>> any suspicious.
>>
>> The last line I can see is:
>> Uncompressing Linux... done, booting the kernel.
>
> Huh. I'm not seeing that at all with the android_omap3_defconfig
>
> Are your bootargs something like:
> 'console=ttyO2,115200n8 mem=256M root=/dev/mmcblk0p2 rw rootfstype=ext3
> rootwait init=/init'
> ?
> thanks
> -john
>
>
>
>
_______________________________________________
linaro-dev mailing list
[email protected]
http://lists.linaro.org/mailman/listinfo/linaro-dev