On 15 March 2012 15:39, Jannis Pohlmann <jannis.pohlm...@codethink.co.uk> wrote: > Hey, > > On 03/15/2012 01:39 AM, Tony Mansson wrote: >> Hi, >> >> This is interesting. I'd like to reproduce the Ethernet speed tests. >> >> Do you have the exact command lines? > > Sure. You'll need two machines, on being the board. Both need to be in > the same 100 or 1000 MBit/s LAN. > > On the receiver's end, run: > > netcat -l 8000 > /dev/null > > This will listen for incoming data on a TCP socket on port 8000. Then, > given the receiver's IP address, run the following command on the > sender's end: > > dd if=/dev/zero bs=1024k count=256 > /dev/tcp/<RECEIVER IP>/8000 > Cool. You might also want to take a look at 'netperf', a small yet powerful tool. At least until 2006(when I last used it) it was a piece of cake to use.
cheers -jassi _______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
