Anyone with a VE board ever encounter something like this?
---------- Forwarded message ---------- From: Bibhuti Panigrahi <bibhuti.panigr...@linaro.org> Date: Tue, Mar 11, 2014 at 5:14 AM Subject: Issue while booting up VE board To: Tom Gall <tom.g...@linaro.org> Hi Tom, I am finding below issues while booting the Versatile Express board. The board boots and u-boot prompt comes but after that it gets powered down because of exceeding power limit (seems to be some PMIC issue). Please find the detailed log below: Cmd> ARM V2M Boot loader v1.1.2 HBI0190 build 2199 ARM V2M Firmware v3.1.1 Build Date: Aug 20 2012 Date: Wed 13 Sep 2006 Time: 05:38:05 Cmd> Powering up system... Daughterboard fitted to site 1. Switching on ATXPSU... ATX3V3: ON VIOset: 1.8V WARNING: PSU 1V0 : 0.79V (21% error) ERROR: PSU 1V0 outside limit, switching off... Powering down, switching on UART0 bypass. Powering down... Disabling debug USB. Switching off ATX PSU. Board powered down, use REBOOT to restart Cmd> Please let me know if you have any pointer to this. Regards, Bibhuti -- Regards, Tom "Where's the kaboom!? There was supposed to be an earth-shattering kaboom!" Marvin Martian Tech Lead, Graphics Working Group | Linaro.org │ Open source software for ARM SoCs w) tom.gall att linaro.org h) tom_gall att mac.com _______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev