On Wed, Nov 9, 2011 at 11:19 AM, Dexter Ji <[email protected]> wrote: > Public bug reported: > > I downloaded the 2011.10 release and it can create SD card sucessfully with > the following hwpack and rootfs. > hwpack: hwpack_linaro-lt-mx5_20111107-0_armel_supported.tar.gz > rootfs: linaro-o-ubuntu-desktop-tar-20111107-0.tar.gz > > But it could not create a image file by the paramter --image_file, it > reported successfully executed. but no file found. > > the following is the detail information: > > ./linaro-media-create --image_file ../mx53_o_1107.img --image_file=3600M > --dev mx53loco --hwpack > ../hwpack_linaro-lt-mx5_20111107-0_armel_supported.tar.gz --binary > ../linaro-o-ubuntu-desktop-tar-20111107-0.tar.gz
You actually asked it to create the file '3600M' in the current directory, so you'll find it there. You probably wanted the second image_file to be image-size. > ------------------------------------------------------------ > Installing (linaro-hwpack-install) > hwpack_linaro-lt-mx5_20111107-0_armel_supported.tar.gz in target rootfs. > Unpacking hardware pack ...Done > Updating apt package lists ... > Ign file: ./ InRelease > Ign file: ./ Release.gpg > Ign file: ./ Release > Ign file: ./ Translation-en > W: Some index files failed to download. They have been ignored, or old ones > used instead. > Reading package lists... Done > Building dependency tree > Reading state information... Done > The following NEW packages will be installed: > devio flash-kernel hwpack-linaro-lt-mx5 linux-firmware > linux-image-3.1.0-1001-linaro-lt-mx5 linux-image-linaro-lt-mx5 > u-boot-linaro-lt-mx53loco u-boot-linaro-mx51evk u-boot-tools > uboot-mkimage wireless-crda > 0 upgraded, 11 newly installed, 0 to remove and 0 not upgraded. > Need to get 0 B/28.1 MB of archives. > After this operation, 0 B of additional disk space will be used. > WARNING: The following packages cannot be authenticated! > wireless-crda linux-image-3.1.0-1001-linaro-lt-mx5 devio flash-kernel > linux-firmware linux-image-linaro-lt-mx5 u-boot-linaro-mx51evk > u-boot-linaro-lt-mx53loco hwpack-linaro-lt-mx5 > u-boot-tools uboot-mkimage > Install these packages without verification [y/N]? y > Can not write log, openpty() failed (/dev/pts not mounted?) > Selecting previously deselected package wireless-crda. > (Reading database ... 93546 files and directories currently installed.) > Unpacking wireless-crda (from .../wireless-crda_1.14_armel.deb) ... > Selecting previously deselected package linux-image-3.1.0-1001-linaro-lt-mx5. > Unpacking linux-image-3.1.0-1001-linaro-lt-mx5 (from > .../linux-image-3.1.0-1001-linaro-lt-mx5_3.1.0-1001.6_armel.deb) ... > Done. > Selecting previously deselected package devio. > Unpacking devio (from .../devio_1.2-1build1_armel.deb) ... > Selecting previously deselected package flash-kernel. > Unpacking flash-kernel (from .../flash-kernel_2.28ubuntu34linaro1_armel.deb) > ... > Selecting previously deselected package linux-firmware. > Unpacking linux-firmware (from .../linux-firmware_1.60_all.deb) ... > Selecting previously deselected package linux-image-linaro-lt-mx5. > Unpacking linux-image-linaro-lt-mx5 (from > .../linux-image-linaro-lt-mx5_3.1.0.1001.1_armel.deb) ... > Selecting previously deselected package u-boot-linaro-mx51evk. > Unpacking u-boot-linaro-mx51evk (from > .../u-boot-linaro-mx51evk_2011.10.2-0ubuntu1~ppa~oneiric_armel.deb) ... > Selecting previously deselected package u-boot-linaro-lt-mx53loco. > Unpacking u-boot-linaro-lt-mx53loco (from > .../u-boot-linaro-lt-mx53loco_2011.09.5-0ubuntu2~ppa3_armel.deb) ... > Selecting previously deselected package hwpack-linaro-lt-mx5. > Unpacking hwpack-linaro-lt-mx5 (from > .../hwpack-linaro-lt-mx5_20111107-0_armel.deb) ... > Selecting previously deselected package u-boot-tools. > Unpacking u-boot-tools (from .../u-boot-tools_2011.06-3ubuntu1_armel.deb) ... > Selecting previously deselected package uboot-mkimage. > Unpacking uboot-mkimage (from .../uboot-mkimage_2011.06-3ubuntu1_all.deb) ... > Processing triggers for man-db ... > Can not write log, openpty() failed (/dev/pts not mounted?) > Setting up wireless-crda (1.14) ... > Setting up linux-image-3.1.0-1001-linaro-lt-mx5 (3.1.0-1001.6) ... > Running depmod. > update-initramfs: deferring update (hook will be called later) > /usr/share/update-notifier/notify-reboot-required: 17: gettext: not found > Examining /etc/kernel/postinst.d. > run-parts: executing /etc/kernel/postinst.d/initramfs-tools > 3.1.0-1001-linaro-lt-mx5 /boot/vmlinuz-3.1.0-1001-linaro-lt-mx5 > update-initramfs: Generating /boot/initrd.img-3.1.0-1001-linaro-lt-mx5 > /bin/df: Warning: cannot read table of mounted file systems: No such file or > directory > > > run-parts: executing /etc/kernel/postinst.d/pm-utils 3.1.0-1001-linaro-lt-mx5 > /boot/vmlinuz-3.1.0-1001-linaro-lt-mx5 > run-parts: executing /etc/kernel/postinst.d/update-notifier > 3.1.0-1001-linaro-lt-mx5 /boot/vmlinuz-3.1.0-1001-linaro-lt-mx5 > /etc/kernel/postinst.d/update-notifier: 17: gettext: not found > Setting up devio (1.2-1build1) ... > Setting up flash-kernel (2.28ubuntu34linaro1) ... > Setting up linux-firmware (1.60) ... > Setting up linux-image-linaro-lt-mx5 (3.1.0.1001.1) ... > Setting up u-boot-linaro-mx51evk (2011.10.2-0ubuntu1~ppa~oneiric) ... > Setting up u-boot-linaro-lt-mx53loco (2011.09.5-0ubuntu2~ppa3) ... > Setting up hwpack-linaro-lt-mx5 (20111107-0) ... > Setting up u-boot-tools (2011.06-3ubuntu1) ... > Setting up uboot-mkimage (2011.06-3ubuntu1) ... > Reading package lists... Done > Building dependency tree > Reading state information... Done > devio set to automatically installed. > linux-image-3.1.0-1001-linaro-lt-mx5 set to automatically installed. > flash-kernel set to automatically installed. > linux-image-linaro-lt-mx5 set to automatically installed. > u-boot-tools set to automatically installed. > u-boot-linaro-lt-mx53loco set to automatically installed. > linux-firmware set to automatically installed. > uboot-mkimage set to automatically installed. > wireless-crda set to automatically installed. > u-boot-linaro-mx51evk set to automatically installed. > N: This command is deprecated. Please use 'apt-mark auto' and 'apt-mark > manual' instead. > Done > Cleaning up ...W: GPG error: http://ppa.launchpad.net oneiric Release: The > following signatures couldn't be verified because the public key is not > available: NO_PUBKEY 57F0C186163F38F3 > Done > ------------------------------------------------------------ > proc umounted > Warning: 3600M is not a block device > Disk 3600M: cannot get geometry > BLKRRPART: Inappropriate ioctl for device > If you created or changed a DOS partition, /dev/foo7, say, then use dd(1) > to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1 > (See fdisk(8).) > > Formating boot partition > > mkfs.vfat 3.0.9 (31 Jan 2010) > Loop device does not match a floppy size, using default hd params > > Formating root partition > > mke2fs 1.41.14 (22-Dec-2010) > Filesystem label=rootfs > OS type: Linux > Block size=4096 (log=2) > Fragment size=4096 (log=2) > Stride=0 blocks, Stripe width=0 blocks > 193152 inodes, 772096 blocks > 38604 blocks (5.00%) reserved for the super user > First data block=0 > Maximum filesystem blocks=792723456 > 24 block groups > 32768 blocks per group, 32768 fragments per group > 8048 inodes per group > Superblock backups stored on blocks: > 32768, 98304, 163840, 229376, 294912 > > Writing inode tables: done > Creating journal (16384 blocks): done > Writing superblocks and filesystem accounting information: done > > This filesystem will be automatically checked every 24 mounts or > 180 days, whichever comes first. Use tune2fs -c or -i to override. > 396+1 records in > 396+1 records out > 202928 bytes (203 kB) copied, 0.0503509 s, 4.0 MB/s > Image Name: Linux > Created: Wed Nov 9 17:46:33 2011 > Image Type: ARM Linux Kernel Image (uncompressed) > Data Size: 4219448 Bytes = 4120.55 kB = 4.02 MB > Load Address: 70008000 > Entry Point: 70008000 > Image Name: initramfs > Created: Wed Nov 9 17:46:34 2011 > Image Type: ARM Linux RAMDisk Image (uncompressed) > Data Size: 1864643 Bytes = 1820.94 kB = 1.78 MB > Load Address: 00000000 > Entry Point: 00000000 > Image Name: boot script > Created: Wed Nov 9 17:46:34 2011 > Image Type: ARM Linux Script (uncompressed) > Data Size: 305 Bytes = 0.30 kB = 0.00 MB > Load Address: 00000000 > Entry Point: 00000000 > Contents: > Image 0: 297 Bytes = 0.29 kB = 0.00 MB > > Populating rootfs partition > Be patient, this may take a few minutes > > > Creating /etc/flash-kernel.conf > > > Updating /etc/network/interfaces > > Done creating Linaro image on 3600M Here you can see that the file 3600M was created. > > ** Affects: linaro-image-tools > Importance: Undecided > Status: New > > -- > You received this bug notification because you are subscribed to Linaro > Image Tools. > https://bugs.launchpad.net/bugs/887967 > > Title: > Unable create image file with 2011.10 release. > > Status in Linaro Image Tools: > New > > Bug description: > I downloaded the 2011.10 release and it can create SD card sucessfully with > the following hwpack and rootfs. > hwpack: hwpack_linaro-lt-mx5_20111107-0_armel_supported.tar.gz > rootfs: linaro-o-ubuntu-desktop-tar-20111107-0.tar.gz > > But it could not create a image file by the paramter --image_file, it > reported successfully executed. but no file found. > > the following is the detail information: > > ./linaro-media-create --image_file ../mx53_o_1107.img --image_file=3600M > --dev mx53loco --hwpack > ../hwpack_linaro-lt-mx5_20111107-0_armel_supported.tar.gz --binary > ../linaro-o-ubuntu-desktop-tar-20111107-0.tar.gz > ------------------------------------------------------------ > Installing (linaro-hwpack-install) > hwpack_linaro-lt-mx5_20111107-0_armel_supported.tar.gz in target rootfs. > Unpacking hardware pack ...Done > Updating apt package lists ... > Ign file: ./ InRelease > Ign file: ./ Release.gpg > Ign file: ./ Release > Ign file: ./ Translation-en > W: Some index files failed to download. They have been ignored, or old ones > used instead. > Reading package lists... Done > Building dependency tree > Reading state information... Done > The following NEW packages will be installed: > devio flash-kernel hwpack-linaro-lt-mx5 linux-firmware > linux-image-3.1.0-1001-linaro-lt-mx5 linux-image-linaro-lt-mx5 > u-boot-linaro-lt-mx53loco u-boot-linaro-mx51evk u-boot-tools > uboot-mkimage wireless-crda > 0 upgraded, 11 newly installed, 0 to remove and 0 not upgraded. > Need to get 0 B/28.1 MB of archives. > After this operation, 0 B of additional disk space will be used. > WARNING: The following packages cannot be authenticated! > wireless-crda linux-image-3.1.0-1001-linaro-lt-mx5 devio flash-kernel > linux-firmware linux-image-linaro-lt-mx5 u-boot-linaro-mx51evk > u-boot-linaro-lt-mx53loco hwpack-linaro-lt-mx5 > u-boot-tools uboot-mkimage > Install these packages without verification [y/N]? y > Can not write log, openpty() failed (/dev/pts not mounted?) > Selecting previously deselected package wireless-crda. > (Reading database ... 93546 files and directories currently installed.) > Unpacking wireless-crda (from .../wireless-crda_1.14_armel.deb) ... > Selecting previously deselected package linux-image-3.1.0-1001-linaro-lt-mx5. > Unpacking linux-image-3.1.0-1001-linaro-lt-mx5 (from > .../linux-image-3.1.0-1001-linaro-lt-mx5_3.1.0-1001.6_armel.deb) ... > Done. > Selecting previously deselected package devio. > Unpacking devio (from .../devio_1.2-1build1_armel.deb) ... > Selecting previously deselected package flash-kernel. > Unpacking flash-kernel (from .../flash-kernel_2.28ubuntu34linaro1_armel.deb) > ... > Selecting previously deselected package linux-firmware. > Unpacking linux-firmware (from .../linux-firmware_1.60_all.deb) ... > Selecting previously deselected package linux-image-linaro-lt-mx5. > Unpacking linux-image-linaro-lt-mx5 (from > .../linux-image-linaro-lt-mx5_3.1.0.1001.1_armel.deb) ... > Selecting previously deselected package u-boot-linaro-mx51evk. > Unpacking u-boot-linaro-mx51evk (from > .../u-boot-linaro-mx51evk_2011.10.2-0ubuntu1~ppa~oneiric_armel.deb) ... > Selecting previously deselected package u-boot-linaro-lt-mx53loco. > Unpacking u-boot-linaro-lt-mx53loco (from > .../u-boot-linaro-lt-mx53loco_2011.09.5-0ubuntu2~ppa3_armel.deb) ... > Selecting previously deselected package hwpack-linaro-lt-mx5. > Unpacking hwpack-linaro-lt-mx5 (from > .../hwpack-linaro-lt-mx5_20111107-0_armel.deb) ... > Selecting previously deselected package u-boot-tools. > Unpacking u-boot-tools (from .../u-boot-tools_2011.06-3ubuntu1_armel.deb) ... > Selecting previously deselected package uboot-mkimage. > Unpacking uboot-mkimage (from .../uboot-mkimage_2011.06-3ubuntu1_all.deb) ... > Processing triggers for man-db ... > Can not write log, openpty() failed (/dev/pts not mounted?) > Setting up wireless-crda (1.14) ... > Setting up linux-image-3.1.0-1001-linaro-lt-mx5 (3.1.0-1001.6) ... > Running depmod. > update-initramfs: deferring update (hook will be called later) > /usr/share/update-notifier/notify-reboot-required: 17: gettext: not found > Examining /etc/kernel/postinst.d. > run-parts: executing /etc/kernel/postinst.d/initramfs-tools > 3.1.0-1001-linaro-lt-mx5 /boot/vmlinuz-3.1.0-1001-linaro-lt-mx5 > update-initramfs: Generating /boot/initrd.img-3.1.0-1001-linaro-lt-mx5 > /bin/df: Warning: cannot read table of mounted file systems: No such file or > directory > > > > run-parts: executing /etc/kernel/postinst.d/pm-utils > 3.1.0-1001-linaro-lt-mx5 /boot/vmlinuz-3.1.0-1001-linaro-lt-mx5 > run-parts: executing /etc/kernel/postinst.d/update-notifier > 3.1.0-1001-linaro-lt-mx5 /boot/vmlinuz-3.1.0-1001-linaro-lt-mx5 > /etc/kernel/postinst.d/update-notifier: 17: gettext: not found > Setting up devio (1.2-1build1) ... > Setting up flash-kernel (2.28ubuntu34linaro1) ... > Setting up linux-firmware (1.60) ... > Setting up linux-image-linaro-lt-mx5 (3.1.0.1001.1) ... > Setting up u-boot-linaro-mx51evk (2011.10.2-0ubuntu1~ppa~oneiric) ... > Setting up u-boot-linaro-lt-mx53loco (2011.09.5-0ubuntu2~ppa3) ... > Setting up hwpack-linaro-lt-mx5 (20111107-0) ... > Setting up u-boot-tools (2011.06-3ubuntu1) ... > Setting up uboot-mkimage (2011.06-3ubuntu1) ... > Reading package lists... Done > Building dependency tree > Reading state information... Done > devio set to automatically installed. > linux-image-3.1.0-1001-linaro-lt-mx5 set to automatically installed. > flash-kernel set to automatically installed. > linux-image-linaro-lt-mx5 set to automatically installed. > u-boot-tools set to automatically installed. > u-boot-linaro-lt-mx53loco set to automatically installed. > linux-firmware set to automatically installed. > uboot-mkimage set to automatically installed. > wireless-crda set to automatically installed. > u-boot-linaro-mx51evk set to automatically installed. > N: This command is deprecated. Please use 'apt-mark auto' and 'apt-mark > manual' instead. > Done > Cleaning up ...W: GPG error: http://ppa.launchpad.net oneiric Release: The > following signatures couldn't be verified because the public key is not > available: NO_PUBKEY 57F0C186163F38F3 > Done > ------------------------------------------------------------ > proc umounted > Warning: 3600M is not a block device > Disk 3600M: cannot get geometry > BLKRRPART: Inappropriate ioctl for device > If you created or changed a DOS partition, /dev/foo7, say, then use dd(1) > to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1 > (See fdisk(8).) > > Formating boot partition > > mkfs.vfat 3.0.9 (31 Jan 2010) > Loop device does not match a floppy size, using default hd params > > Formating root partition > > mke2fs 1.41.14 (22-Dec-2010) > Filesystem label=rootfs > OS type: Linux > Block size=4096 (log=2) > Fragment size=4096 (log=2) > Stride=0 blocks, Stripe width=0 blocks > 193152 inodes, 772096 blocks > 38604 blocks (5.00%) reserved for the super user > First data block=0 > Maximum filesystem blocks=792723456 > 24 block groups > 32768 blocks per group, 32768 fragments per group > 8048 inodes per group > Superblock backups stored on blocks: > 32768, 98304, 163840, 229376, 294912 > > Writing inode tables: done > Creating journal (16384 blocks): done > Writing superblocks and filesystem accounting information: done > > This filesystem will be automatically checked every 24 mounts or > 180 days, whichever comes first. Use tune2fs -c or -i to override. > 396+1 records in > 396+1 records out > 202928 bytes (203 kB) copied, 0.0503509 s, 4.0 MB/s > Image Name: Linux > Created: Wed Nov 9 17:46:33 2011 > Image Type: ARM Linux Kernel Image (uncompressed) > Data Size: 4219448 Bytes = 4120.55 kB = 4.02 MB > Load Address: 70008000 > Entry Point: 70008000 > Image Name: initramfs > Created: Wed Nov 9 17:46:34 2011 > Image Type: ARM Linux RAMDisk Image (uncompressed) > Data Size: 1864643 Bytes = 1820.94 kB = 1.78 MB > Load Address: 00000000 > Entry Point: 00000000 > Image Name: boot script > Created: Wed Nov 9 17:46:34 2011 > Image Type: ARM Linux Script (uncompressed) > Data Size: 305 Bytes = 0.30 kB = 0.00 MB > Load Address: 00000000 > Entry Point: 00000000 > Contents: > Image 0: 297 Bytes = 0.29 kB = 0.00 MB > > Populating rootfs partition > Be patient, this may take a few minutes > > > Creating /etc/flash-kernel.conf > > > Updating /etc/network/interfaces > > Done creating Linaro image on 3600M > > To manage notifications about this bug go to: > https://bugs.launchpad.net/linaro-image-tools/+bug/887967/+subscriptions > -- You received this bug notification because you are a member of linaro- infrastructure-drivers, which is the registrant for Linaro Image Tools. https://bugs.launchpad.net/bugs/887967 Title: Unable create image file with 2011.10 release. Status in Linaro Image Tools: New Bug description: I downloaded the 2011.10 release and it can create SD card sucessfully with the following hwpack and rootfs. hwpack: hwpack_linaro-lt-mx5_20111107-0_armel_supported.tar.gz rootfs: linaro-o-ubuntu-desktop-tar-20111107-0.tar.gz But it could not create a image file by the paramter --image_file, it reported successfully executed. but no file found. the following is the detail information: ./linaro-media-create --image_file ../mx53_o_1107.img --image_file=3600M --dev mx53loco --hwpack ../hwpack_linaro-lt-mx5_20111107-0_armel_supported.tar.gz --binary ../linaro-o-ubuntu-desktop-tar-20111107-0.tar.gz ------------------------------------------------------------ Installing (linaro-hwpack-install) hwpack_linaro-lt-mx5_20111107-0_armel_supported.tar.gz in target rootfs. Unpacking hardware pack ...Done Updating apt package lists ... Ign file: ./ InRelease Ign file: ./ Release.gpg Ign file: ./ Release Ign file: ./ Translation-en W: Some index files failed to download. They have been ignored, or old ones used instead. Reading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed: devio flash-kernel hwpack-linaro-lt-mx5 linux-firmware linux-image-3.1.0-1001-linaro-lt-mx5 linux-image-linaro-lt-mx5 u-boot-linaro-lt-mx53loco u-boot-linaro-mx51evk u-boot-tools uboot-mkimage wireless-crda 0 upgraded, 11 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B/28.1 MB of archives. After this operation, 0 B of additional disk space will be used. WARNING: The following packages cannot be authenticated! wireless-crda linux-image-3.1.0-1001-linaro-lt-mx5 devio flash-kernel linux-firmware linux-image-linaro-lt-mx5 u-boot-linaro-mx51evk u-boot-linaro-lt-mx53loco hwpack-linaro-lt-mx5 u-boot-tools uboot-mkimage Install these packages without verification [y/N]? y Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package wireless-crda. (Reading database ... 93546 files and directories currently installed.) Unpacking wireless-crda (from .../wireless-crda_1.14_armel.deb) ... Selecting previously deselected package linux-image-3.1.0-1001-linaro-lt-mx5. Unpacking linux-image-3.1.0-1001-linaro-lt-mx5 (from .../linux-image-3.1.0-1001-linaro-lt-mx5_3.1.0-1001.6_armel.deb) ... Done. Selecting previously deselected package devio. Unpacking devio (from .../devio_1.2-1build1_armel.deb) ... Selecting previously deselected package flash-kernel. Unpacking flash-kernel (from .../flash-kernel_2.28ubuntu34linaro1_armel.deb) ... Selecting previously deselected package linux-firmware. Unpacking linux-firmware (from .../linux-firmware_1.60_all.deb) ... Selecting previously deselected package linux-image-linaro-lt-mx5. Unpacking linux-image-linaro-lt-mx5 (from .../linux-image-linaro-lt-mx5_3.1.0.1001.1_armel.deb) ... Selecting previously deselected package u-boot-linaro-mx51evk. Unpacking u-boot-linaro-mx51evk (from .../u-boot-linaro-mx51evk_2011.10.2-0ubuntu1~ppa~oneiric_armel.deb) ... Selecting previously deselected package u-boot-linaro-lt-mx53loco. Unpacking u-boot-linaro-lt-mx53loco (from .../u-boot-linaro-lt-mx53loco_2011.09.5-0ubuntu2~ppa3_armel.deb) ... Selecting previously deselected package hwpack-linaro-lt-mx5. Unpacking hwpack-linaro-lt-mx5 (from .../hwpack-linaro-lt-mx5_20111107-0_armel.deb) ... Selecting previously deselected package u-boot-tools. Unpacking u-boot-tools (from .../u-boot-tools_2011.06-3ubuntu1_armel.deb) ... Selecting previously deselected package uboot-mkimage. Unpacking uboot-mkimage (from .../uboot-mkimage_2011.06-3ubuntu1_all.deb) ... Processing triggers for man-db ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up wireless-crda (1.14) ... Setting up linux-image-3.1.0-1001-linaro-lt-mx5 (3.1.0-1001.6) ... Running depmod. update-initramfs: deferring update (hook will be called later) /usr/share/update-notifier/notify-reboot-required: 17: gettext: not found Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.1.0-1001-linaro-lt-mx5 /boot/vmlinuz-3.1.0-1001-linaro-lt-mx5 update-initramfs: Generating /boot/initrd.img-3.1.0-1001-linaro-lt-mx5 /bin/df: Warning: cannot read table of mounted file systems: No such file or directory run-parts: executing /etc/kernel/postinst.d/pm-utils 3.1.0-1001-linaro-lt-mx5 /boot/vmlinuz-3.1.0-1001-linaro-lt-mx5 run-parts: executing /etc/kernel/postinst.d/update-notifier 3.1.0-1001-linaro-lt-mx5 /boot/vmlinuz-3.1.0-1001-linaro-lt-mx5 /etc/kernel/postinst.d/update-notifier: 17: gettext: not found Setting up devio (1.2-1build1) ... Setting up flash-kernel (2.28ubuntu34linaro1) ... Setting up linux-firmware (1.60) ... Setting up linux-image-linaro-lt-mx5 (3.1.0.1001.1) ... Setting up u-boot-linaro-mx51evk (2011.10.2-0ubuntu1~ppa~oneiric) ... Setting up u-boot-linaro-lt-mx53loco (2011.09.5-0ubuntu2~ppa3) ... Setting up hwpack-linaro-lt-mx5 (20111107-0) ... Setting up u-boot-tools (2011.06-3ubuntu1) ... Setting up uboot-mkimage (2011.06-3ubuntu1) ... Reading package lists... Done Building dependency tree Reading state information... Done devio set to automatically installed. linux-image-3.1.0-1001-linaro-lt-mx5 set to automatically installed. flash-kernel set to automatically installed. linux-image-linaro-lt-mx5 set to automatically installed. u-boot-tools set to automatically installed. u-boot-linaro-lt-mx53loco set to automatically installed. linux-firmware set to automatically installed. uboot-mkimage set to automatically installed. wireless-crda set to automatically installed. u-boot-linaro-mx51evk set to automatically installed. N: This command is deprecated. Please use 'apt-mark auto' and 'apt-mark manual' instead. Done Cleaning up ...W: GPG error: http://ppa.launchpad.net oneiric Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 57F0C186163F38F3 Done ------------------------------------------------------------ proc umounted Warning: 3600M is not a block device Disk 3600M: cannot get geometry BLKRRPART: Inappropriate ioctl for device If you created or changed a DOS partition, /dev/foo7, say, then use dd(1) to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1 (See fdisk(8).) Formating boot partition mkfs.vfat 3.0.9 (31 Jan 2010) Loop device does not match a floppy size, using default hd params Formating root partition mke2fs 1.41.14 (22-Dec-2010) Filesystem label=rootfs OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=0 blocks, Stripe width=0 blocks 193152 inodes, 772096 blocks 38604 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=792723456 24 block groups 32768 blocks per group, 32768 fragments per group 8048 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912 Writing inode tables: done Creating journal (16384 blocks): done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 24 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override. 396+1 records in 396+1 records out 202928 bytes (203 kB) copied, 0.0503509 s, 4.0 MB/s Image Name: Linux Created: Wed Nov 9 17:46:33 2011 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4219448 Bytes = 4120.55 kB = 4.02 MB Load Address: 70008000 Entry Point: 70008000 Image Name: initramfs Created: Wed Nov 9 17:46:34 2011 Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 1864643 Bytes = 1820.94 kB = 1.78 MB Load Address: 00000000 Entry Point: 00000000 Image Name: boot script Created: Wed Nov 9 17:46:34 2011 Image Type: ARM Linux Script (uncompressed) Data Size: 305 Bytes = 0.30 kB = 0.00 MB Load Address: 00000000 Entry Point: 00000000 Contents: Image 0: 297 Bytes = 0.29 kB = 0.00 MB Populating rootfs partition Be patient, this may take a few minutes Creating /etc/flash-kernel.conf Updating /etc/network/interfaces Done creating Linaro image on 3600M To manage notifications about this bug go to: https://bugs.launchpad.net/linaro-image-tools/+bug/887967/+subscriptions _______________________________________________ Mailing list: https://launchpad.net/~linaro-release Post to : [email protected] Unsubscribe : https://launchpad.net/~linaro-release More help : https://help.launchpad.net/ListHelp
