On Tue, Nov 27, 2012 at 06:26:42AM +0100, Stefan Hajnoczi wrote: > On Mon, Nov 26, 2012 at 9:39 PM, L. Alberto Giménez > <[email protected]> wrote: > > I'm currently compiling the drop-sysfs branch. I have an HD 500 device, so > > I will > > give feedback about if it works 'out of the box' or not. > > Thanks for trying it out. On the HD 500 there should be no change in > behavior from before.
OK, so I compiled the cleanup branch, enabled the staging line6 driver (not the debug options since I saw in the mailing list messages that the kernel/user space apps already have debugging capabilities). The module loads fine, but the device won't work: [ 333.697431] usb 1-2.4: new full-speed USB device number 4 using ohci_hcd [ 333.795169] usb 1-2.4: not running at top speed; connect to a high speed hub [ 333.805144] usb 1-2.4: New USB device found, idVendor=0e41, idProduct=414d [ 333.805147] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 333.805149] usb 1-2.4: Product: POD HD500 [ 333.805151] usb 1-2.4: Manufacturer: Line 6 [ 334.284407] line6usb: module is from the staging directory, the quality is unknown, you have been warned. [ 334.284986] line6usb 1-2.4:1.0: Line6 POD HD500 found [ 334.284989] usb 1-2.4: selecting invalid altsetting 1 [ 334.284991] line6usb 1-2.4:1.0: set_interface failed [ 334.284996] line6usb: probe of 1-2.4:1.0 failed with error -22 aplay -l doesn't show anything but my regular sound card information and alsamixer won't show any POD related control. usb-devices output: T: Bus=01 Lev=02 Prnt=03 Port=03 Cnt=01 Dev#= 7 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1 P: Vendor=0e41 ProdID=414d Rev=00.00 S: Manufacturer=Line 6 S: Product=POD HD500 C: #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) Any idea? Regards, -- L. Alberto Giménez JabberID [email protected] GnuPG key ID 0x3BAABDE1 ------------------------------------------------------------------------------ Keep yourself connected to Go Parallel: DESIGN Expert tips on starting your parallel project right. http://goparallel.sourceforge.net _______________________________________________ Line6linux-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/line6linux-devel
