Thanks Christopher ! Yeah I finally make it works! I selected SIP(UDP) but the important thing is to restart linphone because it complains the first time it's set. (use menu: Options/Quit) Perhaps, that should be set as the default setting. Regards, Laurent Le ven. 7 sept. 2018 à 00:39, Christopher Woods <[email protected]> a écrit : > > I did some more reading and it seems a similar problem happened a while ago > where ipv4 and v6 functionality on older kernels was buggy, it caused > problems with 32-bit ipaddrinfo and snmptrapd. > > That made me wonder if this Linphone problem is a bug related to initialising > IPv4, I then found this: > > https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=743494#20 > > It may be an exosip bug concerning protocol versions? You may have to patch > it. > > Make sure you're using "SIP (UDP)" globally and TLS is disabled everywhere, > for testing. > > On Thu, 6 Sep 2018, 21:57 Laurent Caumont, <[email protected]> wrote: >> >> Thank you Christopher but I already saw this thread but that didn't help. >> I also tried to start linphone as root with sudo but that doesn't >> change the behavior. >> >> It seems that the port is correctly detected by nmap. >> pi@raspberrypi:~ $ nmap -p 5061 sip.linphone.org >> >> Starting Nmap 7.40 ( https://nmap.org ) at 2018-09-06 22:50 CEST >> Nmap scan report for sip.linphone.org (91.121.209.194) >> Host is up (0.048s latency). >> rDNS record for 91.121.209.194: sip1.linphone.org >> PORT STATE SERVICE >> 5061/tcp open sip-tls >> >> Nmap done: 1 IP address (1 host up) scanned in 0.46 seconds >> >> >> Regards, >> Laurent >> Le jeu. 6 sept. 2018 à 11:34, Christopher Woods >> <[email protected]> a écrit : >> > >> > This seems like it may be an old bug, try: >> > >> > usermod -aG plugdev lolo >> > >> > Then log out and log back in. >> > >> > https://askubuntu.com/questions/866453/linphone-could-not-start-tls-transport-on-port-5060-maybe-this-port-is-already >> > >> > Regards >> > Chris >> > >> > On Thu, 6 Sep 2018, 07:53 Laurent Caumont, <[email protected]> wrote: >> >> >> >> Hi, >> >> >> >> >> >> I tried several options (TCP, stun...) without success. It always >> >> complain about the port number. >> >> With IPv6 option, it doesn't complain but is not able to register. >> >> I also opened port 5061 on my internet provider box and set it in >> >> linphone. No success. >> >> >> >> On my local netdb.h file, -9 is >> >> EAI_ADDRFAMILY The specified network host does not have any network >> >> addresses in the requested address family. >> >> >> >> What does that mean? >> >> >> >> Regards >> >> >> >> >> >> Le jeu. 6 sept. 2018 01:59, Aymeric Moizard <[email protected]> a écrit : >> >>> >> >>> Hi! >> >>> >> >>> You should check the meaning of the return code for getaddrinfo which is >> >>> "-9". >> >>> >> >>> This will tell you why it fails or at least will help you to make >> >>> progress on a fix. >> >>> >> >>> Aymeric >> >>> >> >>> Le mer. 5 sept. 2018 à 22:19, Laurent Caumont <[email protected]> a >> >>> écrit : >> >>>> >> >>>> Hello, >> >>>> >> >>>> I'm trying to make linphone work on my Linux computers. >> >>>> I tried on my raspberry pi 3 and on my ubuntu laptop. >> >>>> Both report that the port 5060 can't be used. >> >>>> I tried several other values without success. >> >>>> I'm using the 3.6.1 version. >> >>>> >> >>>> It works fine on my android on the same network. >> >>>> Any idea how to fix that ? >> >>>> >> >>>> Thanks >> >>>> Regards, >> >>>> Laurent >> >>>> >> >>>> pi@raspberrypi:~ $ uname -a >> >>>> Linux raspberrypi 4.14.62-v7+ #1134 SMP Tue Aug 14 17:10:10 BST 2018 >> >>>> armv7l GNU/Linux >> >>>> >> >>>> lolo@lolo-1025C:~$ uname -a >> >>>> Linux lolo-1025C 4.15.0-33-generic #36-Ubuntu SMP Wed Aug 15 13:44:35 >> >>>> UTC 2018 i686 i686 i686 GNU/Linux >> >>>> >> >>>> >> >>>> here is the log: >> >>>> message: Using (r/w) config information from .linphonerc >> >>>> message: Initializing LinphoneCore 3.6.1 >> >>>> message: oRTP-0.22.0 initialized. >> >>>> message: assigning PCMU/8000 payload type number 0 >> >>>> message: assigning GSM/8000 payload type number 3 >> >>>> message: assigning PCMA/8000 payload type number 8 >> >>>> message: assigning speex/8000 payload type number 110 >> >>>> message: assigning speex/16000 payload type number 111 >> >>>> message: assigning speex/32000 payload type number 112 >> >>>> message: assigning telephone-event/8000 payload type number 101 >> >>>> message: assigning G722/8000 payload type number 9 >> >>>> message: assigning H263/90000 payload type number 34 >> >>>> message: assigning theora/90000 payload type number 97 >> >>>> message: assigning H263-1998/90000 payload type number 98 >> >>>> message: assigning MP4V-ES/90000 payload type number 99 >> >>>> message: assigning H264/90000 payload type number 102 >> >>>> message: assigning VP8/90000 payload type number 103 >> >>>> message: assigning x-snow/90000 payload type number 96 >> >>>> message: assigning iLBC/8000 payload type number 100 >> >>>> message: assigning AMR/8000 payload type number 104 >> >>>> message: assigning AMR-WB/16000 payload type number 105 >> >>>> message: assigning 1015/8000 payload type number 106 >> >>>> message: assigning G726-16/8000 payload type number 107 >> >>>> message: assigning G726-24/8000 payload type number 108 >> >>>> message: assigning G726-32/8000 payload type number 109 >> >>>> message: assigning G726-40/8000 payload type number 113 >> >>>> message: assigning AAL2-G726-16/8000 payload type number 114 >> >>>> message: assigning AAL2-G726-24/8000 payload type number 115 >> >>>> message: assigning AAL2-G726-32/8000 payload type number 116 >> >>>> message: assigning AAL2-G726-40/8000 payload type number 117 >> >>>> message: assigning SILK/8000 payload type number 118 >> >>>> message: assigning SILK/12000 payload type number 119 >> >>>> message: assigning SILK/16000 payload type number 120 >> >>>> message: assigning SILK/24000 payload type number 121 >> >>>> message: assigning G729/8000 payload type number 18 >> >>>> message: assigning mpeg4-generic/22050 payload type number 122 >> >>>> message: assigning mpeg4-generic/44100 payload type number 123 >> >>>> message: assigning opus/48000 payload type number 124 >> >>>> message: assigning 1016/8000 payload type number 1 >> >>>> message: assigning GSM/8000 payload type number 3 >> >>>> message: assigning G723/8000 payload type number 4 >> >>>> message: assigning LPC/8000 payload type number 7 >> >>>> message: assigning PCMA/8000 payload type number 8 >> >>>> message: assigning G722/8000 payload type number 9 >> >>>> message: assigning L16/44100 payload type number 10 >> >>>> message: assigning L16/44100 payload type number 11 >> >>>> message: assigning G729/8000 payload type number 18 >> >>>> message: assigning H261/90000 payload type number 31 >> >>>> message: assigning MPV/90000 payload type number 32 >> >>>> message: assigning H263/90000 payload type number 34 >> >>>> message: Mediastreamer2 2.9.1 (git: 2.9.0-7-g51d3c20) starting. >> >>>> message: ms_base_init() done >> >>>> message: Registering all soundcard handlers >> >>>> message: Card 'ALSA: default device' added >> >>>> warning: Could not attach mixer to card: Argument invalide >> >>>> warning: Strange, sound card HDA Intel does not seems to be capable of >> >>>> anything, retrying with plughw... >> >>>> message: Card 'ALSA: HDA Intel' added >> >>>> message: Card 'PulseAudio: default' added >> >>>> message: New PulseAudio context state: PA_CONTEXT_CONNECTING >> >>>> message: Registering all webcam handlers >> >>>> message: New PulseAudio context state: PA_CONTEXT_AUTHORIZING >> >>>> message: New PulseAudio context state: PA_CONTEXT_SETTING_NAME >> >>>> message: New PulseAudio context state: PA_CONTEXT_READY >> >>>> message: Webcam V4L2: /dev/video0 added >> >>>> message: Webcam StaticImage: Static picture added >> >>>> message: ms_voip_init() done >> >>>> message: Loading ms plugins from >> >>>> [/usr/lib/i386-linux-gnu/mediastreamer/plugins] >> >>>> message: Cannot open directory >> >>>> /usr/lib/i386-linux-gnu/mediastreamer/plugins: Aucun fichier ou dossier >> >>>> de ce type >> >>>> message: Cannot open directory /usr/lib/liblinphone/plugins: Aucun >> >>>> fichier ou dossier de ce type >> >>>> message: linphone_core_set_playback_gain_db(): no active call. >> >>>> message: linphone_core_set_mic_gain_db(): no active call. >> >>>> message: MTU is supposed to be 1300, rtp payload max size will be 1240 >> >>>> message: Could not find encoder for 1016 >> >>>> message: Could not find decoder for 1016 >> >>>> message: Could not find encoder for GSM >> >>>> message: Could not find decoder for GSM >> >>>> message: Could not find encoder for G723 >> >>>> message: Could not find decoder for G723 >> >>>> message: Could not find encoder for LPC >> >>>> message: Could not find decoder for LPC >> >>>> message: Could not find encoder for G729 >> >>>> message: Could not find decoder for G729 >> >>>> message: Could not find encoder for iLBC >> >>>> message: Could not find decoder for iLBC >> >>>> message: Could not find encoder for telephone-event >> >>>> message: Could not find decoder for telephone-event >> >>>> message: Could not find encoder for AMR >> >>>> message: Could not find decoder for AMR >> >>>> message: Could not find encoder for AMR-WB >> >>>> message: Could not find decoder for AMR-WB >> >>>> message: Could not find encoder for 1015 >> >>>> message: Could not find decoder for 1015 >> >>>> message: Could not find encoder for SILK >> >>>> message: Could not find decoder for SILK >> >>>> message: Could not find encoder for SILK >> >>>> message: Could not find decoder for SILK >> >>>> message: Could not find encoder for SILK >> >>>> message: Could not find decoder for SILK >> >>>> message: Could not find encoder for SILK >> >>>> message: Could not find decoder for SILK >> >>>> message: Could not find encoder for mpeg4-generic >> >>>> message: Could not find decoder for mpeg4-generic >> >>>> message: Could not find encoder for mpeg4-generic >> >>>> message: Could not find decoder for mpeg4-generic >> >>>> message: Could not find encoder for H261 >> >>>> message: Could not find decoder for H261 >> >>>> message: Could not find encoder for MPV >> >>>> message: Could not find decoder for MPV >> >>>> message: Could not find encoder for x-snow >> >>>> message: Could not find decoder for x-snow >> >>>> message: Could not find encoder for H264 >> >>>> message: TLS server method >> >>>> warning: no system certificate loaded >> >>>> error: eXosip: Couldn't read CA list >> >>>> error: eXosip: DH_generate_parameters_ex failed! >> >>>> message: eXosip: Trusted CA folder : '/etc/ssl/certs' >> >>>> warning: no system certificate loaded >> >>>> message: getaddrinfo failure. 0.0.0.0:5061 (-9) >> >>>> warning: Could not start tls transport on port 5061, maybe this port is >> >>>> already used. >> >>>> message: Local interface to reach 87.98.157.38 is 192.168.1.104. >> >>>> message: Local interface to reach 87.98.157.38 is 192.168.1.104. >> >>>> message: New local ip address is 192.168.1.104 >> >>>> message: Network state is now [UP] >> >>>> message: Local interface to reach sip.linphone.org is 192.168.1.104. >> >>>> error: wrong state: create transport layer first >> >>>> error: wrong state: create transport layer first >> >>>> error: wrong state: create transport layer first >> >>>> message: allocating transaction resource 1 1322765239 >> >>>> message: Local interface to reach 87.98.157.38 is 192.168.1.104. >> >>>> _______________________________________________ >> >>>> Linphone-users mailing list >> >>>> [email protected] >> >>>> https://lists.nongnu.org/mailman/listinfo/linphone-users >> >>> >> >>> _______________________________________________ >> >>> Linphone-users mailing list >> >>> [email protected] >> >>> https://lists.nongnu.org/mailman/listinfo/linphone-users >> >> >> >> _______________________________________________ >> >> Linphone-users mailing list >> >> [email protected] >> >> https://lists.nongnu.org/mailman/listinfo/linphone-users >> > >> > _______________________________________________ >> > Linphone-users mailing list >> > [email protected] >> > https://lists.nongnu.org/mailman/listinfo/linphone-users >> >> _______________________________________________ >> Linphone-users mailing list >> [email protected] >> https://lists.nongnu.org/mailman/listinfo/linphone-users > > _______________________________________________ > Linphone-users mailing list > [email protected] > https://lists.nongnu.org/mailman/listinfo/linphone-users
_______________________________________________ Linphone-users mailing list [email protected] https://lists.nongnu.org/mailman/listinfo/linphone-users
