For OSA-2 type devices they are configure in the IOCP as this *---------- * SPECIAL (OSA) *---------- CHPID PATH=(08),SHARED,TYPE=OSA CHPID PATH=(98),SHARED,TYPE=OSA CHPID PATH=(E4),SHARED,TYPE=OSA *---------- * 0C00 *---------- CNTLUNIT CUNUMBR=0C00,PATH=(ED),UNITADD=((00,8)),SHARED=N, * UNIT=CTC,PROTOCL=S4 IODEVICE ADDRESS=(C00,008),CUNUMBR=(0C00),TIMEOUT=N,UNIT=CTCA CNTLUNIT CUNUMBR=0C20,PATH=(08),UNIT=OSA IODEVICE ADDRESS=(0C20,15),CUNUMBR=0C20,UNITADD=00,STADET=Y,UNIT=OSA IODEVICE ADDRESS=(0C2F),CUNUMBR=0C20,UNITADD=FE,STADET=Y,UNIT=OSAD CNTLUNIT CUNUMBR=0C40,PATH=(E4),UNIT=OSA IODEVICE ADDRESS=(0C40,15),CUNUMBR=0C40,UNITADD=00,STADET=Y,UNIT=OSA IODEVICE ADDRESS=(0C4F),CUNUMBR=0C40,UNITADD=FE,STADET=Y,UNIT=OSAD CNTLUNIT CUNUMBR=0C60,PATH=(98),UNIT=OSA IODEVICE ADDRESS=(0C60,15),CUNUMBR=0C60,UNITADD=00,STADET=Y,UNIT=OSA IODEVICE ADDRESS=(0C6F),CUNUMBR=0C60,UNITADD=FE,STADET=Y,UNIT=OSAD
For OSA-express devices they are coded this way, at least for QDIO, *---------- * SPECIAL (OSA-Express GB-E, QDIO) *---------- CHPID PATH=(C0),SHARED,TYPE=OSD 0C40 CHPID PATH=(C1),SHARED,TYPE=OSD 0C50 *---------- * SPECIAL (OSA-Express FENET 10/100MB, QDIO) *---------- CHPID PATH=(C2),SHARED,TYPE=OSD 0C60 CHPID PATH=(C3),SHARED,TYPE=OSD 0C70 *---------- * 0C00 *---------- CNTLUNIT CUNUMBR=0C40,PATH=(C0),UNIT=OSA IODEVICE ADDRESS=(0C40,15),CUNUMBR=0C40,UNITADD=00,UNIT=OSA IODEVICE ADDRESS=(0C4F),CUNUMBR=0C40,UNITADD=FE,UNIT=OSAD CNTLUNIT CUNUMBR=0C50,PATH=(C1),UNIT=OSA IODEVICE ADDRESS=(0C50,15),CUNUMBR=0C50,UNITADD=00,UNIT=OSA IODEVICE ADDRESS=(0C5F),CUNUMBR=0C50,UNITADD=FE,UNIT=OSAD CNTLUNIT CUNUMBR=0C60,PATH=(C2),UNIT=OSA IODEVICE ADDRESS=(0C60,15),CUNUMBR=0C60,UNITADD=00,UNIT=OSA IODEVICE ADDRESS=(0C6F),CUNUMBR=0C60,UNITADD=FE,UNIT=OSAD CNTLUNIT CUNUMBR=0C70,PATH=(C3),UNIT=OSA IODEVICE ADDRESS=(0C70,15),CUNUMBR=0C70,UNITADD=00,UNIT=OSA IODEVICE ADDRESS=(0C7F),CUNUMBR=0C70,UNITADD=FE,UNIT=OSAD By the way I perform all IOCP changes on VM without the help of OS/390 or z/OS. Larry Davis, \|/ Nielsen Media Research (. .) VM Systems Programmer ___ooO-(_)-Ooo___ mailto:[EMAIL PROTECTED] -----Original Message----- From: Robert Morrison [mailto:[EMAIL PROTECTED]] Sent: Tuesday, November 19, 2002 09:49 To: [EMAIL PROTECTED] Subject: Re: g3 and OSA-2 Ethernet problem The devices are shared at the I/O definition level. If the environment is mixed, it would have been created on the OS/390 side. The I/O definition can be viewed from the Hardware Management Console if you have the proper authority or it can be view via HCD on the OS/390 side. I am not exactly sure how to determine the shareability from the Linux side. Bob M. --------------------------------- Do you Yahoo!? Yahoo! Web Hosting - Let the expert host your site