On Friday, 06/04/2004 at 04:04 ZE2, Monteleone <[EMAIL PROTECTED]> wrote: > Hello, > > I use two osa card defined in QDIO mode. > Primary card port 0 and Secondary card port 1 are used in my VSWITCH1, > ip address is 172.18.1.0/24. > Primary card port 1 and Secondary card port 0 are used in my VSWITCH2 ip > address is 192.168.6.0/24. > > VSWITCH1 as PRIROUTER set on. > > I defined a router linux with eth0 on VSWITCH1 and eth1 on VSWITCH2, > this guest has ip_forward=1 and works like a router between this two > vswitch. There is no problem to ping 172.18.1.x to 192.168.6.x thru this > router for all linux guest. > > If I try to ping from a local station on the same lan 172.18.1.16, a > z/vm linux guest 192.168.6.141, packet seems to be blocked by cp. > > An idea ?
Did you remember to tell 172.18.1.16 that 192.168.6.0/24 was reachable through your virtual router? (The purpose of the vswitch is to eliminate the need for a virtual router.) Alan Altmark Sr. Software Engineer IBM z/VM Development ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
