yeah i think you are right. -----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] Behalf Of Alan Altmark Sent: Monday, November 01, 2004 09:08 To: [EMAIL PROTECTED] Subject: Re: Hipersocket MTU invalid argument SLES 9
On Monday, 11/01/2004 at 08:42 MST, "Seader, Cameron" <[EMAIL PROTECTED]> wrote: > Why is that? i was able to do 64k on SLES 8 Actually, Cameron, you were not. HiperSockets are physically incapable of handling an MTU larger than 56K. You may have *specified* 64K, but you didn't *get* 64K. Alan Altmark z/VM Development IBM Endicott ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 This transmission may contain information that is privileged, confidential and/or exempt from disclosure under applicable law. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or use of the information contained herein (including any reliance thereon) is STRICTLY PROHIBITED. If you received this transmission in error, please immediately contact the sender and destroy the material in its entirety, whether in electronic or hard copy format. Thank you. A1. ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
