Those don't look like errors to me, just informational messages. Looks like everything is up and running. Does an "ifconfig -a" command show both eth0 and hsi1?
Mark Post -----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Hugo Rivera Sent: Wednesday, January 05, 2005 3:29 PM To: LINUX-390@VM.MARIST.EDU Subject: Hipersocket - qdio error messages Hello list - I'm trying to connect a Linux (z/VM guest) server with a z/OS LPAR via HiprSockets and I'm getting the following error messages when I reboot the Linux server. I can't ping from Linux to z/OS or viceversa. qeth: Trying to use card with devnos 0x7100/0x7101/0x7102 qdio : Adapter interruption facility not installed. qdio : Not all CHSCs supported. Continuing. qeth: Device 0x7100/0x7101/0x7102 is a HiperSockets card (level: D3GF) with link type magic (portname: ) qeth: VLAN not supported on hsi1 qeth: IPv6 not supported on hsi1 qeth: Broadcasting not supported on hsi1 qeth: Trying to use card with devnos 0x1004/0x1005/0x1006 qeth: Device 0x1004/0x1005/0x1006 is an OSD Express card (level: 0358) with link type Fast Eth (portname: ETHPORT1) eth0: no IPv6 routers present hsi1: no IPv6 routers present I would appreciate any help. Thank you. Hugo Rivera SSA II County of Contra Costa Department of Information Technology ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
