Hello all, I have a SLES9 31-bit image I installed a short while back un zVM. I am now trying to put the SP2 pack on it using YaST. After I finished I rebooted and it would not come up correctly, it appeared to be looking for a file in the previous kernel level name. Remembering discussions regarding mksles9root and zipl I thought to look for those. I can't find mksles9root but did locate zipl and the zipl.conf.
When I ran zipl the system would not boot. Got this error: RAMDISK: Compressed image found at block 0 RAMDISK: ran out of compressed data invalid compressed format (err=1) VFS: Cannot open root device "dasda1" or unknown-block(0,0) Please append a correct "root=" boot option Kernel panic: VFS: Unable to mount root fs on unknown-block(0,0) 01: HCPGSP2629I The virtual machine is placed in CP mode due to a SIGP stop I am trying to figure out what I did wrong, and where I can find more information about zipl.conf. I see the options but not an explanation of things on the parameter = card. Any help? Thanks Bob Bates Citigroup Technology Infrastructure 916-374-5017 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390