I am getting a failure when I try to set up a cloning server per the book sg24-6695-00 - From LPAR to Virtual Servers in Two Days - I am getting an IDX terminate. at the very end and linuxrc terminates at line 14 a bit before that
00: RDR FILE 0049 SENT FROM TERRAPIN PUN WAS 0049 RECS 162K CPY 001 A NOHOLD NO KEEP 00: 0000003 FILES CHANGED 00: 0000003 FILES CHANGED Linux version 2.6.5-7.97-s390x ([EMAIL PROTECTED]) (gcc version 3.3.3 (SuSE Linux) ) #1 SMP Fri Jul 2 14:21:59 UTC 2004 We are running under VM (64 bit mode) On node 0 totalpages: 256000 DMA zone: 256000 pages, LIFO batch:16 Normal zone: 0 pages, LIFO batch:1 HighMem zone: 0 pages, LIFO batch:1 Built 1 zonelists (management makes us eliminate IP and other stuff in email now. Sorry) Kernel command line: ramdisk_size=65536 root=/dev/ram1 ro init=/linuxrc TERM=dumb INST_PASSWORD=*******IP_ADDR=1**.**.100.134 AUTOINSTALL=yes IP_HOST=terrapin.**.****.**.** IP_GATEWAY=1**.**.100.3 IP_INTERFACE=qeth IP_MTU=1500 IP_NETMASK=255.255.255.0 IP_BROADCAST=1**.**.100.254 READ_DEVNO=9000 WRITE_DEVNO=9001 DATA_DEVNO=9002 PORTNAME=SX88 IP_DNS=1**.**.100.6 INST_INFO=nfs INST_IP_ADDR=1**.**.102.81 INST_IP_DIR=/cd_images/sles9/sles9root/ INST_SCREEN=VNC VNC_PASSWORD=******* PID hash table entries: 4096 (order 12: 65536 bytes) ---- Snip------ Detected 2 CPU's Boot cpu address 0 cpu 0 phys_idx=0 vers=FF ident=055606 machine=2064 unused=0000 cpu 1 phys_idx=1 vers=FF ident=055606 machine=2064 unused=0000 Brought up 2 CPUs checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 12666k freed debug: Initialization complete NET: Registered protocol family 16 VFS: Disk quotas dquot_6.5.1 Initializing Cryptographic API RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize --- snip--- md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). warning: can't open /etc/mtab: No such file or directory done doing movetotmpfs NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver Setting up loopback... Saving boot messages in /var/log/boot.msg Enabling system logging... Oct 6 16:58:23 suse syslogd 1.4.1: restart. /linuxrc: line 11: 76 Terminated /sbin/syslogd -m 720 = = =- Welcome to SUSE LINUX Enterprise Server 9 for zSeries -= = = Please select the type of your network device: 0) no network 1) OSA Token Ring (lcs) 2) OSA Ethernet 3) OSA-Gigabit Ethernet or OSA-Express Fast Ethernet 4) Channel To Channel 5) Escon 6) IUCV 8) Hipersockets 9) OSA High speed Token Ring (qdio) 10) Show subchannels and detected devices Loading qeth... qdio: loading QDIO base support version 2 ($Revision: 1.79.2.1 $/$Revision: 1.57 $/$Revision: 1.23 $) qeth: loading qeth S/390 OSA-Express driver ($Revision: 1.77.2.20 $/$Revision: .98.2.11 $/$Revision: 1.27.2.5 $/$Revision: 1.8.2.2 $/$Revision: 1.7.2.1 $/$Revi sion: 1.5.2.4 $/$Revision: 1.19.2.7 $ :IPv6 :VLAN) Detecting available channels ... done 6 OSA Express, Gigabit Ethernet or High Speed Token Ring Channels were detected. First OSA Express, Gigabit Ethernet or High Speed Token Ring Channels that were detected: Device Addresses CHPID(s) 8000 ed 8001 ed 8002 ed 9000 01 9001 01 9002 01 Format for OSA Express configuration: Read Channel,Write Channel,Data Channel The Read Channel must be an even device address, The Write Channel must be the Read Channel address plus 1, The Data Channel must be the Read Channel address plus 2. Possible configuration: read: 0x8000, write: 0x8001, data: 0x8002 Enter the device addresses for the qeth module, e.g. '0.0.8000,0.0.8001,0.0.800 ' Device 0.0.9000 configured qeth: received an IDX TERMINATE with cause code 0x4e qeth: Initialization in hardsetup failed! rc=-5 The parm file I am using: (mangement now makes us remove certain indentifying things - so sorry for the ** all over the place) ramdisk_size=65536 root=/dev/ram1 ro init=/linuxrc TERM=dumb INST_PASSWORD=******* IP_ADDR=1**.70.100.134 AUTOINSTALL=yes IP_HOST=terrapin.**.**.**.** IP_GATEWAY=1**.**.100.3 IP_INTERFACE=qeth IP_MTU=1500 IP_NETMASK=255.255.255.0 IP_BROADCAST=1**.**.100.254 READ_DEVNO=9000 WRITE_DEVNO=9001 DATA_DEVNO=9002 PORTNAME=SX88 IP_DNS=1**.**.100.6 INST_INFO=nfs INST_IP_ADDR=1**.70.102.81 INST_IP_DIR=/cd_images/sles9/sles9root/ INST_SCREEN=VNC VNC_PASSWORD=******* I have a simple parmfile, (the default from the install CD's) that when punched with the same kernel and initrd causes a manual installation to work fine. ramdisk_size=65536 root=/dev/ram1 ro init=/linuxrc TERM=dumb So what if anything, do people suggest I do? ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390