I corrected gateway (good catch, thank you) but problem is still the same. Could you email me parmfile which works for you and doesn't ask for hostname ? Thanks Marian
--- "Post, Mark K" <[EMAIL PROTECTED]> wrote: > If you cut and pasted this, as opposed to typing it > in, I see a problem. > Your Gateway specification has 6 octets instead of > 4. I don't know if > this would mess up the parsing of the Hostname or > not, but it might. > > > Mark Post > > -----Original Message----- > From: Linux on 390 Port > [mailto:[EMAIL PROTECTED] On Behalf Of > Marian Gasparovic > Sent: Saturday, October 28, 2006 3:56 PM > To: LINUX-390@VM.MARIST.EDU > Subject: Re: sles10 hostname > > ramdisk_size=65536 root=/dev/ram1 ro init=/linuxrc > TERM=dumb > HostIP=129.40.178.130 Hostname=lat130.pbm.ihost.com > > > Gateway=129.40.178.254.178.254 Netmask=255.255.255.0 > > > Broadcast=129.40.178.255 Layer2=0 > > > ReadChannel=0.0.0600 WriteChannel=0.0.0601 > DataChannel=0.0.0602 > Nameserver=129.40.106.1 Portname=dontcare > > > Install=nfs://129.40.46.206/nfs/sles10/CD1 > > > UseVNC=1 VNCPassword=123456 > > > InstNetDev=osa OsaInterface=qdio OsaMedium=eth > Manual=0 > > Everything is used correctly, vncserver starts, I > connect there, set partitions, choose software, > start > install. After all needed files from CD1 are read, > system is rebooted, then rest of files are read and > then it asks for hostname and domain. > So I don't enter any of these parameters anywhere > during install, only hostname > > --- "Post, Mark K" <[EMAIL PROTECTED]> wrote: > > > Marian, > > > > Could you show your whole parmfile? I might be > able > > to take a look at > > it. > > > > > > Mark Post > > > > -----Original Message----- > > From: Linux on 390 Port > > [mailto:[EMAIL PROTECTED] On Behalf Of > > Marian Gasparovic > > Sent: Friday, October 27, 2006 1:33 PM > > To: LINUX-390@VM.MARIST.EDU > > Subject: sles10 hostname > > > > Hello all, > > I install SLES10 with parameters in PARMFILE. > > Everything works nicely, only Hostname=xxx is not > > used, installer asks for it after first reboot. Am > I > > doing something wrong ? > > Thank you > > > > =================== > > Marian Gasparovic > > =================== > > "The mere thought hadn't even begun to > speculate > > about the merest > > possibility of crossing my mind." > > > > > ---------------------------------------------------------------------- > > For LINUX-390 subscribe / signoff / archive access > > instructions, > > send email to [EMAIL PROTECTED] with the > > message: INFO LINUX-390 or visit > > http://www.marist.edu/htbin/wlvindex?LINUX-390 > > > > > > > ________________________________________________________________________ > __________________ > Check out the New Yahoo! Mail - Fire up a more > powerful email and get > things done faster. > (http://advision.webevents.yahoo.com/mailbeta) > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access > instructions, > send email to [EMAIL PROTECTED] with the > message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access > instructions, > send email to [EMAIL PROTECTED] with the > message: INFO LINUX-390 or visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > ____________________________________________________________________________________ Want to start your own business? Learn how on Yahoo! Small Business (http://smallbusiness.yahoo.com) ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390