Here is the ifconfig:

eth0      Link encap:Ethernet  HWaddr 00:11:25:C0:D6:A5
          inet addr:130.10.230.101  Bcast:130.10.255.255  Mask:255.255.0.0
          inet6 addr: fe80::11:2500:9c0:d6a5/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1492  Metric:1
          RX packets:55489 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4839 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:8928543 (8.5 Mb)  TX bytes:746842 (729.3 Kb)

hsi0      Link encap:Ethernet  HWaddr 00:00:00:00:00:00
          inet addr:192.68.24.1  Bcast:192.68.24.255  Mask:255.255.255.0
          inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
          UP BROADCAST RUNNING NOARP MULTICAST  MTU:1492  Metric:1
          RX packets:9 errors:0 dropped:0 overruns:0 frame:0
          TX packets:492 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:756 (756.0 b)  TX bytes:33760 (32.9 Kb)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:22 errors:0 dropped:0 overruns:0 frame:0
          TX packets:22 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:1712 (1.6 Kb)  TX bytes:1712 (1.6 Kb)




And here is the startup of the TCP/IP


(See attached file: tcpstahi.txt)

Thanks in advance.

Aris.










             Rich Smrcina
             <[EMAIL PROTECTED]
             om>                                                      Para
             Enviado por:              LINUX-390@VM.MARIST.EDU
             Linux on 390 Port                                          cc
             <[EMAIL PROTECTED]
             IST.EDU>                                               Asunto
                                       Re: Help with Linux - to VSE
                                       Hipersockets
             20/04/2007 14:58


                Por favor,
                responda a
             Linux on 390 Port
             <[EMAIL PROTECTED]
                 IST.EDU>






Do the interfaces come up on both Linux and VSE.  Send the output from
the Linux ifconfig and your VSE TCP/IP config and startup messages.

Aristarc Diez Redorta wrote:
> Hi Rick,
>
> we cannot ping from Linux to VSE and from Vse to Linux.
> This is the first time we're trying to configure it.
>
> TIA.
> Aris.

--
Rich Smrcina
VM Assist, Inc.
Phone: 414-491-6001
Ans Service:  360-715-2467
rich.smrcina at vmassist.com

Catch the WAVV!  http://www.wavv.org
WAVV 2007 - Green Bay, WI - May 18-22, 2007

----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or
visit
http://www.marist.edu/htbin/wlvindex?LINUX-390

----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390

Attachment: tcpstahi.txt
Description: Binary data

Reply via email to