The Clarion requires you to have accessed the storage subsystem itself before the work can be done (I'm not a storage guy -- especially not mid-range) and I was just listing for Craig the steps we had to go through as the Clarion is different to the DMX's. I am now accessing the Clarion successfully (but haven't rebooted to confirm it is all still there !)
Jerry Whitteridge Safeway Inc 925 951 4184 > -----Original Message----- > From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On > Behalf Of George Kuch > Sent: Wednesday, February 06, 2008 1:03 PM > To: LINUX-390@VM.MARIST.EDU > Subject: Re: zFCP Disk > > Have you confirmed that the NPIV ports are in the same fabric > zone as the > clariion ? > > > Regards, > > George Kuch > zSeries zFCP Firmware Development > [EMAIL PROTECTED], 845-435-6806, t/l 295-6806 "Email Firewall" made the following annotations. ------------------------------------------------------------------------------ Warning: All e-mail sent to this address will be received by the corporate e-mail system, and is subject to archival and review by someone other than the recipient. This e-mail may contain proprietary information and is intended only for the use of the intended recipient(s). If the reader of this message is not the intended recipient(s), you are notified that you have received this message in error and that any review, dissemination, distribution or copying of this message is strictly prohibited. If you have received this message in error, please notify the sender immediately. ============================================================================== ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390