Mark,
1. This is exactly what I did and then the first address was configured and the two other UAs were considered as extra devices. When I recycled the image the driver waits while the necessary addresses are not available. So by any reason, the grouping of the ccw-addresses seems not to work. I analysed further and found out that in the hwcfg-qeth-bus-ccw-0.0.xxxx files the CCW_CHAN_IDS field was empty. Filling this in with the correct UAs resolved actually my problem. What I wonder now is, why is there no command that can activate a new OSA adapter, like chccwdev is there for DASD. Using Yast is very difficult, when the network stack is not working as it does not work on the 3270 screen. So a command / shell script would be very useful for an emergency action. Well I can do it myself of course but it would be nice when a commonly available solution would be available. BR Florian On Thu, Sep 4, 2008 at 5:25 PM, Mark Post <[EMAIL PROTECTED]> wrote: > >>> On 9/4/2008 at 10:39 AM, in message > <[EMAIL PROTECTED]>, Florian > Bilek > <[EMAIL PROTECTED]> wrote: > > Dear all, > > > > I tried to add a qeth adapter to my z/Linux Guest and now I have the > > problem that the adapters are not automaically configured during the SuSE > > boot. The image has two adapters. The first one was configured during the > > install process and worked first. The second one that I attached later (3 > > unitaddresses) appeard as three separate adapters in the yast menu > > Networkcard. I didn't see how I could have done this with Yast as add an > > adapter seems also not to work really under s390x. > > Go to YaST -> Network Devices -> Network Card. Select the first (lowest > numbered) device number for the new card, and then select "Edit" to > configure it. > > > Mark Post > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > -- Best regards Florian Bilek ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
