Can you display the program old PSW and the instruction that the address portion of the PSW points to? (Actually, the address less the ILC.)
On 4/14/09 2:17 PM, "Daniel Jarboe" <daniel.jar...@gmail.com> wrote: >> >>> What kind of hardware and operating system are you running this on? >> > > A Ubuntu 8.10 installation. P4 Intel chip, 1GB RAM. > > I still end up at disabled wait state with 3.04.1 (though with the older > release of hercules it reports instcount of 18 rather than 2). I'll have to > try this on some other boxes. > > herc 3.04.1 SLES11 IPL from suse.ins: > HHCCP007I CPU0000 architecture mode set to > ESA/390 > HHCCP011I CPU0000: Disabled wait > state > PSW=000A0000 > 00000000 > Command > ==> > CPU0000 PSW=000A0000 00000000 M.W..... > instcount=18 > > herc 3.04.1 SLES10SP2 IPL from suse.ins: > IPLs, but ultimately blows up with an instruction count of about 1.7 million > (before installer asks for anything) > > herc 3.04.1 Debian Lenny IPL from reader: > IPLs, installer runs but is unable to "activate" dasd > > herc 3.06 SLES11 IPL from suse.ins: > HHCCP007I CPU0000 architecture mode set to > ESA/390 > HHCCP011I CPU0000: Disabled wait > state > PSW=000A0000 > 00000000 > Command > ==> > CPU0000 PSW=000A000000000000 24M.W..... > instcount=2 > > herc 3.06 SLES10SP2 IPL from suse.ins: > IPLs, full installation complete without apparent problem > > herc 3.06 Debian Lenny IPL from reader: > IPLs, full installation complete without apparent problem > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
