Yes, I thought about that also... I remember seeing somewhere that the memory requirement had gone up considerably, so I made it 1024M (1 GB).
Thanks for trying anyway.. Mike ----- Original Message ----- From: "Tom Duerbusch" <duerbus...@stlouiscity.com> To: <LINUX-390@VM.MARIST.EDU> Sent: Wednesday, June 17, 2009 2:30 PM Subject: Re: LCS problem Installing SLES 11 in "partition" ( more) How big is the guest machine size? On SLES10, I need 768 MB to load the ram disk with an OSA connection. OSA, from what I remember, needs 32 MB, just for buffers. I don't recall if that was for each connection or for each of the tripplet addresses. But it was a lot more than I had when I moved from VCTCA to VSWITCH. Tom Duerbusch THD Consulting
Mike At HammockTree <m...@hammocktree.us> 6/17/2009 1:17 PM >>>
Since I dndn't get much response form my initial query yesterday, I thought I'd include a little more information this time. I'll paste in the log that I captured when trying to install SLES 11 into a partition. I tried both OSA2/LCS and CTCI. Note that the install program found both devices correctly at 0400 and 0600, but when I actually tried to use them, I got errors. I tried the OSA2/LCS first, then the CTCI. Any suggestions? Thanks, Mike ========== log begins > Start Installation 1) Start Installation or Update 2) Boot Installed System 3) Start Rescue System
1 Choose the source medium. 1) DVD / CD-ROM 2) Network 3) Hard Disk
2 Choose the network protocol. 1) FTP 2) HTTP 3) NFS 4) SMB / CIFS (Windows Share) 5) TFTP
3 Detecting and loading network drivers ccwgroup: disagrees about version of symbol struct_module Choose the network device. 1) IBM parallel CTC Adapter (0.0.0600) 2) IBM OSA2 Adapter (0.0.0400)
2 **** Try OSA2 / LCS **** Please choose the physical medium. 1) Ethernet 2) Token Ring
1 ccwgroup: disagrees about version of symbol struct_module *** failed to load lcs module *** No network device found. Load a network module first. *** No repository found. Choose the network protocol. 1) FTP 2) HTTP 3) NFS 4) SMB / CIFS (Windows Share) 5) TFTP 3 Choose the network device. 1) IBM parallel CTC Adapter (0.0.0600) 2) IBM OSA2 Adapter (0.0.0400)
2 ***** Try CTCI ****** ccwgroup: disagrees about version of symbol struct_module *** failed to load ctcm module *** No network device found. Load a network module first. *** No repository found. Choose the network protocol. 1) FTP 2) HTTP 3) NFS 4) SMB / CIFS (Windows Share) 5) TFTP ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
