Robert,
By looking in /sys/bus/ccw/drivers/zfcp/0.0.e801/online , it's
equal to 1 so I believe to be online. These luns, FCP devs, and all are
currently running a test DB2 image and being used quite a bit for
training this week. My storage admin did get back to me and verified we
are at code level 3 so Mr. Harder's suggestion that we need to be level
4 or up could be true. OR are you doing what we are and y'all are seeing
the log in?
Regarding the other issue of lun expansion with this setup, have y'all
ever done it and do you know the steps taken?
Robert J Brenneman wrote:
OK - next thing that comes to mind is that the FCP devices don't
actually attempt to log in to the san until you vary them online
within linux.
If your FCP device is 0f01 then: chccwdev -e 0.0.0f01
Once you've done that - you should see the device login with the NPIV
WWPN on the san switch, in addition to the native WWPN of the FCP
channel.
--
Jay Brenneman
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
--
--
Brian W. France
Systems Administrator (Mainframe)
Pennsylvania State University
Administrative Information Services - Infrastructure/SYSARC
Rm 25 Shields Bldg., University Park, Pa. 16802
814-863-4739
b...@psu.edu <mailto:b...@psu.edu>
"To make an apple pie from scratch, you must first invent the universe."
Carl Sagan
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
