Where do I get instructions on doing this?? Ruddy
-----Original Message----- From: Linux on 390 Port [mailto:linux-...@vm.marist.edu] On Behalf Of Mark Post Sent: Thursday, December 16, 2010 2:48 PM To: LINUX-390@VM.MARIST.EDU Subject: Re: ipl problem >>> On 12/16/2010 at 02:59 PM, "Melancon, Ruddy" <melanc...@dot.state.al.us> >>> wrote: > 00: IPL 202 CLEAR > 00: zIPL v1.8.0-44.22.5 interactive boot menu > 00: > 00: 0. default (SLES11_SP1) > 00: > 00: 1. SLES11_SP1 > 00: 2. FailsafeV1 > 00: 3. ipl > 00: > 00: Note: VM users please use '#cp vi vmsg <number> <kernel-parameters>' > 00: > 00: Please choose (default will boot in 10 seconds): > 00: Booting default (SLES11_SP1)... > 00: HCPGIR450W CP entered; disabled wait PSW 000A0000 00000102 Not sure how this came about, but I think your solution is to boot from the VM reader using the installation kernel/initrd, activate your DASD, mount your root file system (and /boot if that is separate) and re-run zipl. Mark Post ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/ ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
