I have restore the disk to a pre-LVM image. This image knows nothing about 208-213. I have commented these volumes out in the 'user direct' file.
I tried this but it takes me to the install menu, not Yast or an option to select ssh. Ruddy -----Original Message----- From: Linux on 390 Port [mailto:linux-...@vm.marist.edu] On Behalf Of Mauro Souza Sent: Thursday, December 16, 2010 3:40 PM To: LINUX-390@VM.MARIST.EDU Subject: Re: ipl problem When you (or someone else) installed the first primordial Linux image, the installation kernel and initrd was used. In most shops, there's an exec somewhere named SLES10 EXEC or RHEL5 EXEC or something like that. Log on your dead penguim, and issue those commands: #CP IPL CMS ACC (NOPROF That will bring you to a bare CMS, and it's all we need. Ask about where the IPL execs for the installation are, you will need them. Assuming the execs and initrd/kernel images are on the disk 200 on LINUXOP (as is in my place), issue this: LINK LINUXOP 200 1200 RR ACC 1200 Z SLES11SP1 (if the exec is called SLES11SP1. If not, check with a FLIST * EXEC Z). This will bring up the installation mode. Proceed as usual, to the point where Yast asks you to choose what kind of terminal you want to use. Select SSH. Fire up your ssh client, connect to the now undead penguim, and run this: chccwdev -e 202-213 vgscan vgchange -ay >From now, you will have your disks and LVM activated. I don't know if you put / and /boot on the LVM or not. Let's continue as if you did: mkdir /tmp/root mount /dev/mapper/vg-name/lv-name /mnt/root mount -o bind /dev /tmp/root/dev mount -o bind /sys /tmp/root/sys mount -t proc none /tmp/root/proc chroot /tmp/root cd /boot mkinitrd zipl exit cd / umount /tmp/root/* (easier than issue a lot of umounts) shutdown -h now >From now, you have re-created the boot record and all the structures needed to boot. Try to boot from your dasd again. Ask anything you need. Mauro http://mauro.limeiratem.com - registered Linux User: 294521 Scripture is both history, and a love letter from God. On Thu, Dec 16, 2010 at 7:19 PM, Melancon, Ruddy <melanc...@dot.state.al.us>wrote: > Where do I get instructions on doing this?? > > Ruddy > > -----Original Message----- > From: Linux on 390 Port [mailto:linux-...@vm.marist.edu] On Behalf Of Mark > Post > Sent: Thursday, December 16, 2010 2:48 PM > To: LINUX-390@VM.MARIST.EDU > Subject: Re: ipl problem > > >>> On 12/16/2010 at 02:59 PM, "Melancon, Ruddy" < > melanc...@dot.state.al.us> wrote: > > > 00: IPL 202 CLEAR > > 00: zIPL v1.8.0-44.22.5 interactive boot menu > > 00: > > 00: 0. default (SLES11_SP1) > > 00: > > 00: 1. SLES11_SP1 > > 00: 2. FailsafeV1 > > 00: 3. ipl > > 00: > > 00: Note: VM users please use '#cp vi vmsg <number> <kernel-parameters>' > > 00: > > 00: Please choose (default will boot in 10 seconds): > > 00: Booting default (SLES11_SP1)... > > 00: HCPGIR450W CP entered; disabled wait PSW 000A0000 00000102 > > Not sure how this came about, but I think your solution is to boot from the > VM reader using the installation kernel/initrd, activate your DASD, mount > your root file system (and /boot if that is separate) and re-run zipl. > > > Mark Post > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > ---------------------------------------------------------------------- > For more information on Linux on System z, visit > http://wiki.linuxvm.org/ > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > ---------------------------------------------------------------------- > For more information on Linux on System z, visit > http://wiki.linuxvm.org/ > ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/ ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
