>>> On 9/8/2011 at 04:55 PM, Victor Echavarry Diaz <vechava...@evertecinc.com>
wrote:
> Mark:
> You're right is IPL the old one. For some reason when update the service
> pack, the IPL disk change from 150 to 151. Is there a way to change it on the
> mkinitrd or the zipl?
What volume is the "IPL volume" is determined by this entry in /etc/zipl.conf:
:menu
target = /boot/zipl
For that to somehow change between device numbers sounds like /boot was not
mounted when the kernel was installed. If /boot is mounted now, just
re-running zipl should correct it. Or, if /boot is _not_ normally mounted (for
whatever reason), then make sure /boot is not mounted and re-run zipl.
Mark Post
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For more information on Linux on System z, visit
http://wiki.linuxvm.org/
