>>> On 2/24/2015 at 07:33 AM, Jake anderson <justmainfra...@gmail.com> wrote: > Under the parmfile I do see the below entry: > > ramdisk_size=65536 root=/dev/ram1 ro init=/linuxrc TERM=dumb > Broadcast=xxx.xxx.xxx.xxx Gateway=xxx.xxx.xxx.xxx HostIP=xxx.xxx.xxx.xxx > Hostname=xxxxx.xxx.com Layer2=0 Portname=INTRANET > Install=http://xxx.xxx.xxx.xxx/novell/sles10/zseries/sp3/dvd1/ > Nameserver=xxx.xxx.xxx.xxx Netmask=255.255.255.0 Password=xxxxx > Username=anonymous UseVNC=1 VNCPassword=xxxxx > ReadChannel=0.0.0c00 WriteChannel=0.0.0c01 DataChannel=0.0.0c02 > OsaInterface=qdio OsaMedium=eth InstNetDev=osa
If AutoYaST had been used, there would be an "autoyast=" parameter in there. So it looks like a manual install was done. Mark Post ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/